Motorola CPEI 890 user manual WiMAX Security Tab, Firewall Tab, Internet Protocol Tab

3 Basic Configuration

WiMAX Security Tab

The WiMAX Security tab contains your authentication method. Check with your service provider to determine a user name and password are required for authentication purposes.

Table 3-5WiMAX Security Tab

Field or Button	Description
Authentication Method	Drop down box allows you to select either
	EAP-TLS (default) or EAP-TTLS/MS-
	CHAPv2.
User Name (EAP-TTLS/MS-CHAPv2 only)	Enter the User Name supplied by your
	service provider.
Password (EAP-TTLS/MS-CHAPv2 only)	Enter the Password supplied by your
	service provider.
Realm	Supplied by your service provider.

If your authentication method is EAP-TLS, then a User Name and Password are not necessary.

Click the Apply button.

Internet Protocol Tab

Please check with your service provider for these settings. If you are unsure of the settings, leave the default values set and click the Apply button.

If your service provider has instructed you to change any of these settings, be sure to click the Apply button when you are finished.

Firewall Tab

A firewall helps to protect your home network from unauthorized access. It also helps to manage authorized access from the internet to your CPE.

Table 3-6Firewall Tab

Field or Button	Description
Enable Firewall	Check this box to enable the firewall for
	your home network.
Enable Web Login from Internet	(Grayed out if Enable Firewall is not
	selected).
	Check this box to enables you to access
	your CPE device from a network other
	than your own.
Web Login Port from Internet	Choose a port number to connect to when
	logging in from a network other than your
	own. The default is 8080.

3-4

JAN 2011