Motorola CPEI 890 user manual Installation, Before you Begin, Easy Setup

Page 8

Installation

2

Chapter 2: Installation

Overview

To install the Desktop CPEi 890 Series, review the following sections:

Before You Begin

Easy Setup

Before you Begin

Before you begin installation, check that you have received the following items with your Desktop CPEi 890:

Table 2-1In the box with your CPE, you should have

Item

Description

AC Power Adapter

Power adapter cord connects the Desktop

 

CPE to an AC electrical outlet.

 

 

Ethernet Cable

The Ethernet cable connects the Internet

 

port on your Desktop CPE to your PC or

 

laptop computer.

 

 

Desktop CPEi 890 Quick Start Guide

Desktop CPEi 890 Quick Start Guide

 

 

In addition, you need:

A computer

An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if your service provider has supplied you with two telephone numbers.

Easy Setup

The CPE is easily set up in your home. Basic installation equipment needed are the power adapter, Ethernet cable, a PC or laptop computer and the CPE device.

If you want to use the VoIP functionality, you need an RJ-11 phone cable and a telephone.

Perform the following tasks before attaching the power cord or powering up the unit:

Stand the CPE on a flat surface.

Plug the AC power adapter cord into an AC outlet.

Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.

Plug the other end of the Ethernet cable into the Ethernet connector of your computer.

To use VoIP functionality of the phone, plug one end of the phone line into the activated phone connector on the back of the unit. Phone line activation is dependent upon your service contract.

Plug the other end of the phone line into the phone line connector of your telephone.

2-1

JAN 2011

Image 8
Contents CPEi 890 Series Contents Configuring TCP/IP Desktop CPEi 890 User Guide OverviewPowerful Features in a Single Unit Front of the CPEBack of the CPE Operating InformationThis page intentionally left blank Before you Begin InstallationEasy Setup Advanced Setup Procedure to Log into the CPEBefore you Begin Configuration Logging in to the CPEDevice Time Setup Wizard and AuthenticationChange Password WiMAX Security AccountRestart Button 2Status ScreenThis page intentionally left blank Basic Configuration Personalize MenuDevice Name Tab Password TabDevice Time Tab Restore Factory Settings Tab Internet MenuInternet Protocol Tab WiMAX Security TabFirewall Tab Dynamic DNS Tab Status MenuTelephony Tab Telephony MenuNetwork Tab Account Tab 4Telephony MenuRing Tone Tab Caller ID TabCall Forwarding Tab Voice Mail Tab Special Number Tab Field or Button Description Wi-Fi Wi-Fi MenuWi-Fi Security WEP Configuration WPA/WPA2 ConfigurationWi-Fi Protected Setup WPS Option #1, Push Button Control PBCOption #2, Personal Identification Number PIN This page intentionally left blank Advanced Configuration Port Forwarding MenuForwarding Tab Local Address MenuDhcp Server Tab 2Local Address MenuLease Status Tab Lease Reservation TabControl Panel System Tab Software TabCertificate Tab Wi-Fi Advanced About TabField or Button Description WMM This page intentionally left blank Configuring TCP/IP Configuring TCP/IP in Windows XPConfiguring TCP/IP JAN JAN Configuring TCP/IP in Windows Vista JAN 11Local Area Connection selection 13Internet Protocol Version 4 TCP/IPv4 properties selection JAN This page intentionally left blank Troubleshooting PowerAdditional Troubleshooting Help Computer Cannot Log On to the CPETroubleshooting Important Safety and Legal Information 6814927F46