Motorola CPEI 890 user manual Lease Status Tab, Lease Reservation Tab

Page 35

4

Advanced Configuration

Table 4-3DHCP Server Tab

Field or Button

Description

DHCP Ending IP Address

Sets the final IP address assigned by the

 

DHCP server. If the DHCP server runs out

 

of DHCP addresses, users cannot access

 

network resources. If this happens,

 

increase the Ending IP or reduce the

 

Lease Time.

 

 

DHCP Lease Time

Sets the time, in seconds, that a network

 

computer remains connected to the

 

gateway using its current assigned IP

 

address. At the end of this time, the DHCP

 

server renews the lease or assigns the

 

computer a new IP address. The default is

 

3600 seconds (one hour). The maximum is

 

999999 seconds (about 278 hours).

 

 

Be sure to click the Apply button once you have made changes.

Lease Status Tab

The Lease Status tab in the Local Address menu displays the active DHCP leases since the last reboot. The Lease Status Tab contains the following selections:

Table 4-4Lease Status Tab

Field or Button

Description

Client Host Name

Displays the client host name. The Name

 

field is limited to 20 characters (only 5

 

appear in display).

 

 

MAC Address

Media Access Control (MAC) address.

 

 

IP Address

Shows the IP Address for each active

 

lease.

 

 

Remaining Lease Duration

Shows the amount of time, in seconds,

 

remaining in the lease.

 

 

Be sure to click the Apply button once you have made changes.

Lease Reservation Tab

This tab allows you to manage the lease reservation so that the same client receives the same IP address each time. The Lease Reservation Tab contains the following selections:

4-4

JAN 2011

Image 35
Contents CPEi 890 Series Contents Configuring TCP/IP Overview Desktop CPEi 890 User GuideFront of the CPE Powerful Features in a Single UnitOperating Information Back of the CPEThis page intentionally left blank Before you Begin InstallationEasy Setup Logging in to the CPE Advanced SetupProcedure to Log into the CPE Before you Begin ConfigurationDevice Time Setup Wizard and AuthenticationChange Password Account WiMAX Security2Status Screen Restart ButtonThis page intentionally left blank Personalize Menu Basic ConfigurationDevice Name Tab Password TabDevice Time Tab Internet Menu Restore Factory Settings TabInternet Protocol Tab WiMAX Security TabFirewall Tab Status Menu Dynamic DNS TabTelephony Tab Telephony MenuNetwork Tab 4Telephony Menu Account TabCaller ID Tab Ring Tone TabCall Forwarding Tab Voice Mail Tab Special Number Tab Field or Button Description Wi-Fi Menu Wi-FiWi-Fi Security WPA/WPA2 Configuration WEP ConfigurationOption #1, Push Button Control PBC Wi-Fi Protected Setup WPSOption #2, Personal Identification Number PIN This page intentionally left blank Port Forwarding Menu Advanced ConfigurationLocal Address Menu Forwarding Tab2Local Address Menu Dhcp Server TabLease Reservation Tab Lease Status TabControl Panel System Tab Software TabCertificate Tab About Tab Wi-Fi AdvancedField or Button Description WMM This page intentionally left blank Configuring TCP/IP in Windows XP Configuring TCP/IPConfiguring TCP/IP JAN JAN Configuring TCP/IP in Windows Vista JAN 11Local Area Connection selection 13Internet Protocol Version 4 TCP/IPv4 properties selection JAN This page intentionally left blank Computer Cannot Log On to the CPE TroubleshootingPower Additional Troubleshooting HelpTroubleshooting Important Safety and Legal Information 6814927F46