Dynalink RTA230 manual PPP over Ethernet PPPoE Mode, Isp

Page 67

Chapter 5:Connection Mode

PPP over Ethernet (PPPoE) Mode

ISP

(Internet Service Provider)

 

Dynamic Public IP

Default Private IP

STM-1

assigned by BRAS

 

 

192.168.1.1

 

 

 

192.168.1.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ethernet

AAA

RDAIUS

Server

*BRAS: Broadband Remote Access Server

BRAS

 

ADSL

Hub

DSLAM

 

Router

 

PPP over Ethernet

PPPoE+NAT+DHCP on Private LAN

192.168.1.2

PC(S)

Description:

In this deployment environment, the PPPoE session is between the ADSL WAN interface and BRAS. The ADSL Router gets a public IP address from BRAS when connecting to DSLAM. The multiple client PCs will get private IP address from the DHCP server enabled on private LAN. The enabled NAT mechanism will translate the IP information for clients to access the Internet.

Configuration:

1.Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.

2.Go to Quick Setup. Type in the VCI and VPI value. Then click the Next button. eg:

VPI – 0 VCI – 39

3.On the Configure Internet Connection -Connection Type page, select the PPP over ATM (PPPoA) then click the Next button.

4.In the PPP Username and Password page, enter the PPP username and password that you got from your ISP.

5.Select Dial on Demand and type in the number for inactivity timeout. The default is 20. Or select Always on.

6.In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Check Enable DHCP Server on the LAN box. And type in the start and end points. Then type in the leased time that you want. Finally click Next. eg.:

Primary IP address:192.168.1.1 Subnet Mask:255.255.255.0 Start IP Address:192.168.1.2 End IP Address: 192.168.1.254

7.Check the network information. Make sure the settings match the settings provided by ISP. Click Finish.

59

Image 67
Contents Adsl Router/Modem 000230-rta Safety Notes Contents Chapter Appendix Adsl Compliance FeaturesATM Features Bridging FeaturesConfiguration and Management Subscription for Adsl ServiceRouting Features Security FeaturesPhysical Outlook LED IndicatorsFront Panel USB Rear PanelChoosing a place for the Adsl Router Connecting the Adsl RouterFor Windows ME USB Driver InstallationFor Windows For Windows XP Uninstall the USB DriverFor Windows XP Setting TCP/IP on Client PC ConfigurationFor Windows Configuration Page For Windows ME For Windows NT Configuration Page For Windows Page For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK For Windows 98ME Renew IP Address on Client PCFor Windows NT For Windows Using Web-Based Manager Web ConfigurationOutline of Web Manager To Have the New Settings Take EffectViewing the Web Connection Type Quick SetupQuick Start Connect to InternetDial on Demand PPP PasswordPPP Username Always OnLeased Time Primary IP AddressSubnet Mask End IP AddressMAC Encapsulated Routing MER Preferred DNS server Enable NATAlternate DNS server IP over ATM None Bridging Primary IP Address Overview StatusAdsl BER Test Adsl LineRouting Table Internet ConnectionTraffic Counters Dhcp TableARP Table Apply Advanced SetupLAN- IP Address LAN-DHCP ServerWAN Internet Setting VPI Virtual Path Identifier WAN Adsl SettingsIP Routing Static Route Adding a New OneRemove Static Route Configuring Other Routers on Your LANAdsl Router IP Routing Dynamic RoutingRouter B NAT Virtual Servers DNS ServerIP Address seen by Internet Users NAT DMZ Host Connecting to the Virtual ServersFirewall NAT Dynamic DNSFiltering by IP address DiagnosticsPage Date and Time Access AccountRemote Access ManagementSystem Log Configure System LogViewing System Log Snmp SettingView System Log button Backup Config Reset Router Update FirmwareUPnP for XP Web Configuration Connection Mode Configuration PPP over ATM PPPoA ModeDescription Check PPP IP extension then click Next PPP over ATM PPPoA IP Extension ModePrimary IP address192.168.1.1 Subnet Mask255.255.255.0 ISP PPP over Ethernet PPPoE ModePPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Secondary IP Address Subnet mask Primary DNS server Secondary DNS server Unnumbered IP over ATM IPoAConnection Mode Unnumbered IP over ATM IPoA+NAT Connection Mode Bridge Mode Connection Mode Problems with WAN Problems with LANTroubleshooting Glossary VPI Virtual Path Identifier & VCI Virtual Channel Identifier Page Glossary Software SpecificationsHardware

RTA230 specifications

The Dynalink RTA230 is a high-performance router designed for both home and small business environments, offering reliable connectivity and multiple features that enhance the user experience. With a sleek and compact design, it fits seamlessly into various spaces while delivering robust performance.

One of the standout features of the RTA230 is its dual-band Wi-Fi capability, which supports both 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to connect multiple devices without experiencing significant interference or lag. The 5GHz band is particularly useful for high-demand applications, such as streaming videos in 4K, online gaming, and video conferencing, where speed and stability are crucial.

The router supports the latest Wi-Fi 5 (802.11ac) technology, offering faster speeds and improved connection quality compared to its predecessors. With combined speeds of up to 1.9 Gbps, the RTA230 is well-suited to handle a variety of online tasks, from basic browsing to intensive bandwidth applications. This technology ensures users can enjoy seamless connectivity throughout the home or office.

Another key characteristic of the Dynalink RTA230 is its impressive range. Equipped with advanced antennas, the router provides excellent coverage, eliminating dead spots and ensuring that users can remain connected even in larger spaces. This makes it an ideal solution for multi-room setups, where consistent signal strength is a priority.

Security is a major consideration for any network device, and the RTA230 does not disappoint. It offers robust security features, including WPA3 encryption, which ensures greater protection against unauthorized access. Additionally, the router includes a built-in firewall and other essential security protocols to safeguard user's data.

The Dynalink RTA230 also supports easy installation and management through its user-friendly interface. Users can quickly set up their network using a mobile app or web-based interface, where they can manage connected devices, set parental controls, and monitor network traffic, all from the comfort of their smartphone or computer.

In summary, the Dynalink RTA230 is a versatile router that combines speed, range, and security into a single package. Its dual-band Wi-Fi, support for the latest technology, and user-friendly management options make it an excellent choice for anyone looking to enhance their Internet experience, whether at home or in a small office environment.