Dynalink RTA230 manual Numbered IP over ATM IPoA

Page 70

ADSL Router User Manual

Numbered IP over ATM (IPoA)

 

 

Default Private IP

 

 

192.168.1.1

 

ISP

STM-1

Loop

 

10.3.75.49

(Internet Service Provider)

 

 

 

10.3.70.1

 

 

 

BRAS

DSLAM

ADSL

Hub

AAA

Router

 

 

 

 

 

RDAIUS

 

 

 

 

Server

 

 

 

 

*BRAS: Broadband

 

IP over ATM

 

 

 

 

 

 

Remote Access Server

 

Public IP Pre-assigned

 

 

 

 

 

 

 

 

by ISP

 

 

10.3.75.51

S/W

10.3.75.50

PC(S)

Description:

If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN.

The following example uses the LAN IP address ranging from 10.3.75.49 to 10.3.75.54 and the subnet mask for LAN is 255.255.255.248. The WAN address is 10.3.70.1, and the subnet mask for WAN is 255.255.255.252.

Configuration:

1.Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.

2.Go to Quick Setup. Type in the VCI and VPI value. Then click the Next button.

VPI – 0 VCI – 32

3.On the Configure Internet Connection -Connection Type page, select the IP over ATM (IPoA) then click the Next button.

4.In the WAN IP Settings page, select Use the following IP address and type in the IP address, subnet mask and gateway that you got from ISP. Then, select Use the following DNS Server Address. Type in the Primary DNS server and Secondary DNS server. Click Next for next page.

WAN IP Address: 10.3.70.1

WAN Subnet Mask: 255.255.255.252

Primary DNS server: 168.95.1.1

Secondary DNS server: 168.95.192.1

5.In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN.

Primary IP Address: 192.168.1.1

Subnet mask: 255.255.255.0

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

6.Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next.

Secondary IP Address: 10.3.75.49

Subnet mask: 255.255.255.248

7.Check the network information. Make sure the settings match the settings provided by ISP. Click Finish.

62

Image 70
Contents Adsl Router/Modem 000230-rta Safety Notes Contents Chapter Appendix Bridging Features FeaturesATM Features Adsl ComplianceSecurity Features Subscription for Adsl ServiceRouting Features Configuration and ManagementPhysical Outlook LED IndicatorsFront Panel Rear Panel USBConnecting the Adsl Router Choosing a place for the Adsl RouterFor Windows ME USB Driver InstallationFor Windows Uninstall the USB Driver For Windows XPFor Windows XP Configuration Setting TCP/IP on Client PCFor Windows Configuration Page For Windows ME For Windows NT Configuration Page For Windows Page For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK Renew IP Address on Client PC For Windows 98MEFor Windows NT For Windows Web Configuration Using Web-Based ManagerOutline of Web Manager To Have the New Settings Take EffectViewing the Web Connect to Internet Quick SetupQuick Start Connection TypeAlways On PPP PasswordPPP Username Dial on DemandEnd IP Address Primary IP AddressSubnet Mask Leased TimeMAC Encapsulated Routing MER Preferred DNS server Enable NATAlternate DNS server IP over ATM None Bridging Primary IP Address Status OverviewAdsl Line Adsl BER TestDhcp Table Internet ConnectionTraffic Counters Routing TableARP Table LAN-DHCP Server Advanced SetupLAN- IP Address ApplyWAN Internet Setting Adding a New One WAN Adsl SettingsIP Routing Static Route VPI Virtual Path IdentifierConfiguring Other Routers on Your LAN Remove Static RouteAdsl Router IP Routing Dynamic RoutingRouter B DNS Server NAT Virtual ServersIP Address seen by Internet Users Connecting to the Virtual Servers NAT DMZ HostNAT Dynamic DNS FirewallDiagnostics Filtering by IP addressPage Management Access AccountRemote Access Date and TimeConfigure System Log System LogViewing System Log Snmp SettingView System Log button Backup Config Update Firmware Reset RouterUPnP for XP Web Configuration Connection Mode Configuration PPP over ATM PPPoA ModeDescription Check PPP IP extension then click Next PPP over ATM PPPoA IP Extension ModePrimary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over Ethernet PPPoE Mode ISPPPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Secondary IP Address Subnet mask Unnumbered IP over ATM IPoA Primary DNS server Secondary DNS serverConnection Mode Unnumbered IP over ATM IPoA+NAT Connection Mode Bridge Mode Connection Mode Problems with LAN Problems with WANTroubleshooting Glossary VPI Virtual Path Identifier & VCI Virtual Channel Identifier Page Glossary Specifications SoftwareHardware

RTA230 specifications

The Dynalink RTA230 is a high-performance router designed for both home and small business environments, offering reliable connectivity and multiple features that enhance the user experience. With a sleek and compact design, it fits seamlessly into various spaces while delivering robust performance.

One of the standout features of the RTA230 is its dual-band Wi-Fi capability, which supports both 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to connect multiple devices without experiencing significant interference or lag. The 5GHz band is particularly useful for high-demand applications, such as streaming videos in 4K, online gaming, and video conferencing, where speed and stability are crucial.

The router supports the latest Wi-Fi 5 (802.11ac) technology, offering faster speeds and improved connection quality compared to its predecessors. With combined speeds of up to 1.9 Gbps, the RTA230 is well-suited to handle a variety of online tasks, from basic browsing to intensive bandwidth applications. This technology ensures users can enjoy seamless connectivity throughout the home or office.

Another key characteristic of the Dynalink RTA230 is its impressive range. Equipped with advanced antennas, the router provides excellent coverage, eliminating dead spots and ensuring that users can remain connected even in larger spaces. This makes it an ideal solution for multi-room setups, where consistent signal strength is a priority.

Security is a major consideration for any network device, and the RTA230 does not disappoint. It offers robust security features, including WPA3 encryption, which ensures greater protection against unauthorized access. Additionally, the router includes a built-in firewall and other essential security protocols to safeguard user's data.

The Dynalink RTA230 also supports easy installation and management through its user-friendly interface. Users can quickly set up their network using a mobile app or web-based interface, where they can manage connected devices, set parental controls, and monitor network traffic, all from the comfort of their smartphone or computer.

In summary, the Dynalink RTA230 is a versatile router that combines speed, range, and security into a single package. Its dual-band Wi-Fi, support for the latest technology, and user-friendly management options make it an excellent choice for anyone looking to enhance their Internet experience, whether at home or in a small office environment.