Dynalink RTA230 manual Bridge Mode

Page 78

ADSL Router User Manual

Bridge Mode

 

 

 

 

 

Default Private IP

 

 

192.168.1.1

ISP

STM-1

Loop

 

(Internet Service Provider)

PPPoE

 

 

 

 

 

 

 

 

Client S/W

BRAS

DSLAM

ADSL

Hub

Router

 

AAA

 

 

 

RDAIUS

 

 

 

Server

 

 

PC(S)

*BRAS: Broadband

PPP over Ethernet

Remote Access Server

 

Bridge Mode

Description:

In this example, the ADSL Router acts as a bridge which bridging PC IP address from LAN to WAN. PC IP address can be a static public address that is pre-assigned by ISP or a dynamic public address that is assigned by ISP DHCP server, or can be got from PPPoE software.

Therefore, it does not require a public IP address. It only has a default private IP address (192.168.1.1) for management purpose.

Configuration:

1.Choose a client PC and set the IP as 192.168.1.x (x is between 2 and 254) and the gateway as 192.168.1.1.

2.Start up your browser and type 192.168.1.1 as the address to enter the web-based manager.

3.Go to Quick Setup. Type in the VCI and VPI value. Then click the Next button. eg:

VPI – 0 VCI – 32

4.On the Configure Internet Connection -Connection Type page, select the Bridging then click the Next button.

5.In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN. Finally click Next. eg:

Primary IP address:192.168.1.1 Subnet Mask:255.255.255.0

6.Check the network information. Make sure the settings match the settings provided by ISP. Click Finish.

7.Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg:

IP Address: 10.3.86.81

Subnet Mask: 255.255.255.248

Gateway: 10.3.86.1

8.Click OK. Now the router is well configured. You can access into Internet.

70

Image 78
Contents Adsl Router/Modem 000230-rta Safety Notes Contents Chapter Appendix Bridging Features FeaturesATM Features Adsl ComplianceSecurity Features Subscription for Adsl ServiceRouting Features Configuration and ManagementLED Indicators Physical OutlookFront Panel Rear Panel USBConnecting the Adsl Router Choosing a place for the Adsl RouterUSB Driver Installation For Windows MEFor Windows Uninstall the USB Driver For Windows XPFor Windows XP Configuration Setting TCP/IP on Client PCFor Windows Configuration Page For Windows ME For Windows NT Configuration Page For Windows Page For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK Renew IP Address on Client PC For Windows 98MEFor Windows NT For Windows Web Configuration Using Web-Based ManagerTo Have the New Settings Take Effect Outline of Web ManagerViewing the Web Connect to Internet Quick SetupQuick Start Connection TypeAlways On PPP PasswordPPP Username Dial on DemandEnd IP Address Primary IP AddressSubnet Mask Leased TimeMAC Encapsulated Routing MER Enable NAT Preferred DNS serverAlternate DNS server IP over ATM None Bridging Primary IP Address Status OverviewAdsl Line Adsl BER TestDhcp Table Internet ConnectionTraffic Counters Routing TableARP Table LAN-DHCP Server Advanced SetupLAN- IP Address ApplyWAN Internet Setting Adding a New One WAN Adsl SettingsIP Routing Static Route VPI Virtual Path IdentifierConfiguring Other Routers on Your LAN Remove Static RouteIP Routing Dynamic Routing Adsl RouterRouter B DNS Server NAT Virtual ServersIP Address seen by Internet Users Connecting to the Virtual Servers NAT DMZ HostNAT Dynamic DNS FirewallDiagnostics Filtering by IP addressPage Management Access AccountRemote Access Date and TimeConfigure System Log System LogSnmp Setting Viewing System LogView System Log button Backup Config Update Firmware Reset RouterUPnP for XP Web Configuration Connection Mode PPP over ATM PPPoA Mode ConfigurationDescription PPP over ATM PPPoA IP Extension Mode Check PPP IP extension then click NextPrimary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over Ethernet PPPoE Mode ISPPPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Secondary IP Address Subnet mask Unnumbered IP over ATM IPoA Primary DNS server Secondary DNS serverConnection Mode Unnumbered IP over ATM IPoA+NAT Connection Mode Bridge Mode Connection Mode Problems with LAN Problems with WANTroubleshooting Glossary VPI Virtual Path Identifier & VCI Virtual Channel Identifier Page Glossary Specifications SoftwareHardware

RTA230 specifications

The Dynalink RTA230 is a high-performance router designed for both home and small business environments, offering reliable connectivity and multiple features that enhance the user experience. With a sleek and compact design, it fits seamlessly into various spaces while delivering robust performance.

One of the standout features of the RTA230 is its dual-band Wi-Fi capability, which supports both 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to connect multiple devices without experiencing significant interference or lag. The 5GHz band is particularly useful for high-demand applications, such as streaming videos in 4K, online gaming, and video conferencing, where speed and stability are crucial.

The router supports the latest Wi-Fi 5 (802.11ac) technology, offering faster speeds and improved connection quality compared to its predecessors. With combined speeds of up to 1.9 Gbps, the RTA230 is well-suited to handle a variety of online tasks, from basic browsing to intensive bandwidth applications. This technology ensures users can enjoy seamless connectivity throughout the home or office.

Another key characteristic of the Dynalink RTA230 is its impressive range. Equipped with advanced antennas, the router provides excellent coverage, eliminating dead spots and ensuring that users can remain connected even in larger spaces. This makes it an ideal solution for multi-room setups, where consistent signal strength is a priority.

Security is a major consideration for any network device, and the RTA230 does not disappoint. It offers robust security features, including WPA3 encryption, which ensures greater protection against unauthorized access. Additionally, the router includes a built-in firewall and other essential security protocols to safeguard user's data.

The Dynalink RTA230 also supports easy installation and management through its user-friendly interface. Users can quickly set up their network using a mobile app or web-based interface, where they can manage connected devices, set parental controls, and monitor network traffic, all from the comfort of their smartphone or computer.

In summary, the Dynalink RTA230 is a versatile router that combines speed, range, and security into a single package. Its dual-band Wi-Fi, support for the latest technology, and user-friendly management options make it an excellent choice for anyone looking to enhance their Internet experience, whether at home or in a small office environment.