Dynalink RTA230 manual Numbered IP over ATM IPoA+NAT

Page 72

ADSL Router User Manual

Numbered IP over ATM (IPoA)+NAT

Default Private IP 192.168.1.1

ISP

(Internet Service Provider)

AAA

RDAIUS

Server

*BRAS: Broadband Remote Access Server

STM-1 Loop

10.3.70.1

ADSL

BRAS DSLAM Router

IP over ATM

Public IP Pre-assigned by ISP+NAT

10.3.75.51 10.3.75.49

S/W

Hub

10.3.75.50

PC(S)

Description:

In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled (on ADSL Router or use another NAT box connected to hub) to support multiple clients to access the Router and some public servers (WWW, FTP).

If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs on the LAN.

The following example uses the LAN IP address ranging from 10.3.75.49 to 10.3.75.54 and the subnet mask for LAN is 255.255.255.248. The WAN address is 10.3.70.1, and the subnet mask for WAN is 255.255.255.252.

Configuration:

1.Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.

2.Go to Quick Setup. Type in the VCI and VPI value. Then click the Next button.

VPI – 0 VCI – 32

3.On the Configure Internet Connection -Connection Type page, select the IP over ATM (IPoA) then click the Next button.

4.In the WAN IP Settings page, select Use the following IP address and type in the IP address, subnet mask and gateway that you got from ISP. Then, select Use the following DNS Server Address. Type in the Primary DNS server and Secondary DNS server.

WAN IP Address: 10.3.70.1

WAN Subnet Mask: 255.255.255.252

Primary DNS server: 168.95.1.1

Secondary DNS server: 168.95.192.1

5.Check the Enable NAT box. And click Next.

6.In the Configure LAN side Settings page, type in the IP address and subnet mask for your LAN.

Primary IP Address: 192.168.1.1

Subnet mask: 255.255.255.0

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

7.Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next.

64

Image 72
Contents Adsl Router/Modem 000230-rta Safety Notes Contents Chapter Appendix Features ATM FeaturesBridging Features Adsl ComplianceSubscription for Adsl Service Routing FeaturesSecurity Features Configuration and ManagementLED Indicators Physical OutlookFront Panel Rear Panel USBConnecting the Adsl Router Choosing a place for the Adsl RouterUSB Driver Installation For Windows MEFor Windows Uninstall the USB Driver For Windows XPFor Windows XP Configuration Setting TCP/IP on Client PCFor Windows Configuration Page For Windows ME For Windows NT Configuration Page For Windows Page For Windows XP Configure PC to get IP address from Dhcp Enable Obtain an IP address automatically and then click OK Renew IP Address on Client PC For Windows 98MEFor Windows NT For Windows Web Configuration Using Web-Based ManagerTo Have the New Settings Take Effect Outline of Web ManagerViewing the Web Quick Setup Quick StartConnect to Internet Connection TypePPP Password PPP UsernameAlways On Dial on DemandPrimary IP Address Subnet MaskEnd IP Address Leased TimeMAC Encapsulated Routing MER Enable NAT Preferred DNS serverAlternate DNS server IP over ATM None Bridging Primary IP Address Status OverviewAdsl Line Adsl BER TestInternet Connection Traffic CountersDhcp Table Routing TableARP Table Advanced Setup LAN- IP AddressLAN-DHCP Server ApplyWAN Internet Setting WAN Adsl Settings IP Routing Static RouteAdding a New One VPI Virtual Path IdentifierConfiguring Other Routers on Your LAN Remove Static RouteIP Routing Dynamic Routing Adsl RouterRouter B DNS Server NAT Virtual ServersIP Address seen by Internet Users Connecting to the Virtual Servers NAT DMZ HostNAT Dynamic DNS FirewallDiagnostics Filtering by IP addressPage Access Account Remote AccessManagement Date and TimeConfigure System Log System LogSnmp Setting Viewing System LogView System Log button Backup Config Update Firmware Reset RouterUPnP for XP Web Configuration Connection Mode PPP over ATM PPPoA Mode ConfigurationDescription PPP over ATM PPPoA IP Extension Mode Check PPP IP extension then click NextPrimary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over Ethernet PPPoE Mode ISPPPP over Ethernet PPPoE IP Extension Mode MER Numbered IP over ATM IPoA IP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Secondary IP Address Subnet mask Unnumbered IP over ATM IPoA Primary DNS server Secondary DNS serverConnection Mode Unnumbered IP over ATM IPoA+NAT Connection Mode Bridge Mode Connection Mode Problems with LAN Problems with WANTroubleshooting Glossary VPI Virtual Path Identifier & VCI Virtual Channel Identifier Page Glossary Specifications SoftwareHardware

RTA230 specifications

The Dynalink RTA230 is a high-performance router designed for both home and small business environments, offering reliable connectivity and multiple features that enhance the user experience. With a sleek and compact design, it fits seamlessly into various spaces while delivering robust performance.

One of the standout features of the RTA230 is its dual-band Wi-Fi capability, which supports both 2.4GHz and 5GHz frequency bands. This dual-band functionality allows users to connect multiple devices without experiencing significant interference or lag. The 5GHz band is particularly useful for high-demand applications, such as streaming videos in 4K, online gaming, and video conferencing, where speed and stability are crucial.

The router supports the latest Wi-Fi 5 (802.11ac) technology, offering faster speeds and improved connection quality compared to its predecessors. With combined speeds of up to 1.9 Gbps, the RTA230 is well-suited to handle a variety of online tasks, from basic browsing to intensive bandwidth applications. This technology ensures users can enjoy seamless connectivity throughout the home or office.

Another key characteristic of the Dynalink RTA230 is its impressive range. Equipped with advanced antennas, the router provides excellent coverage, eliminating dead spots and ensuring that users can remain connected even in larger spaces. This makes it an ideal solution for multi-room setups, where consistent signal strength is a priority.

Security is a major consideration for any network device, and the RTA230 does not disappoint. It offers robust security features, including WPA3 encryption, which ensures greater protection against unauthorized access. Additionally, the router includes a built-in firewall and other essential security protocols to safeguard user's data.

The Dynalink RTA230 also supports easy installation and management through its user-friendly interface. Users can quickly set up their network using a mobile app or web-based interface, where they can manage connected devices, set parental controls, and monitor network traffic, all from the comfort of their smartphone or computer.

In summary, the Dynalink RTA230 is a versatile router that combines speed, range, and security into a single package. Its dual-band Wi-Fi, support for the latest technology, and user-friendly management options make it an excellent choice for anyone looking to enhance their Internet experience, whether at home or in a small office environment.