D-Link DSL-100D manual Purpose, Before you Begin

Page 4

About This Guide

Congratulations on your purchase of the ADSL PCI Modem Card for Windows® 95, 98, 2000 Me and NT

4.0.This internal modem card connects to a telephone line using a standard RJ-11 connector and follows all the latest PC industry guidelines, including Plug and Play.

Purpose

The purpose of this manual is to discuss the installation and use of your ADSL PCI Modem Card.

Before you Begin

This manual has all the information you need to install and configure the PCI Modem card and it will walk you through the steps. However, it is very important that you follow each step and gather the information you will need before you begin. This will make the installation smoother and easier. Be sure to read each instruction before you begin.

ii

Image 4
Contents DSL-100D Adsl PCI Modem Page Table of Contents Purpose Before you BeginFeatures System RequirementsOperating Systems Gather InformationDetermine Your Operating System Internet Service Protocol Connection Address and ConfigurationConfiguration Form Adsl Communication SettingsStep Software Installation and Configuration Install Software DriverWindows 98/98SE Driver Installation Page Page Windows 95 Driver Installation Click OK Windows 2000 Driver Installation Page Page Page Windows ME Driver Installation Page Page Windows NT 4.0 Driver Installation Page Page Page Configure Modem Page Configure Modem for Windows Page Page Connect to Internet RFC 2364 PPPoA UsersPage For RFC 1483 and RFC 1577 Users Page Windows 95 and Windows 98 RFC 1483/RFC Windows 2000 RFC 1483/RFC Contacting Technical Support Offices Australia D-LINK AustralasiaJapan Link Japan Uninstall the Modem Modem IndicatorsLED Indicators Technical Specifications Copyright Statement TrademarksFCC Warning Limited Warranty HardwareLimitation of Warranties Page Registration Card Print, type or use block letters