D-Link DSL-100D manual Configuration Form, Adsl Communication Settings

Page 8

Configuration Form

Before beginning the installation, photocopy or print this page and fill out the form provided. Refer to this form when you reach the Service Options panel and enter the proper configurations.

ADSL COMMUNICATION SETTINGS:

Protocol: RFC 1483 Multi-protocol Encapsulation over ATM

RFC 2364 Point-to-Point Protocol over ATM

RFC 1577 Classical Internet Protocol over ATM

VPI value:

VCI value:

Framing: LLC/SNAP

VC MUX

ADSL Mode: ANSI T1.413 Issue 2

ITU G.992.2 Annex A (G.lite)

ITU G.992.1 Annex A (G.dmt)

NETWORK CONFIGURATION FOR RFC 1483 (MULTI-PROTOCOL

ENCAPSULATION OVER ATM) AND RFC 1577 (CLASSICAL IP OVER ATM):

IP Address:

Subnet Mask:

Gateway:

DNS Host Name:

DNS Domain:

DNS Server:

ACCOUNT INFORMATION FOR RFC 2364 POINT-TO-POINT PROTOCOL

OVER ATM

User Name:

Password:

4

Image 8
Contents DSL-100D Adsl PCI Modem Page Table of Contents Purpose Before you Begin Features System RequirementsDetermine Your Operating System Gather InformationOperating Systems Internet Service Protocol Connection Address and ConfigurationConfiguration Form Adsl Communication SettingsStep Software Installation and Configuration Install Software DriverWindows 98/98SE Driver Installation Page Page Windows 95 Driver Installation Click OK Windows 2000 Driver Installation Page Page Page Windows ME Driver Installation Page Page Windows NT 4.0 Driver Installation Page Page Page Configure Modem Page Configure Modem for Windows Page Page Connect to Internet RFC 2364 PPPoA UsersPage For RFC 1483 and RFC 1577 Users Page Windows 95 and Windows 98 RFC 1483/RFC Windows 2000 RFC 1483/RFC Contacting Technical Support Offices Australia D-LINK AustralasiaJapan Link Japan LED Indicators Modem IndicatorsUninstall the Modem Technical Specifications FCC Warning TrademarksCopyright Statement Limited Warranty HardwareLimitation of Warranties Page Registration Card Print, type or use block letters