DSLAAU ManualSoftware Installation
3
The software installation procedures vary depending upon the oper- ating system of your PC. Be sure to follow the instructions provided for the operating system appropriate for you.
3.1 Before you start…
The following information may be required for software installation. Contact your DSL service provider before proceeding with software installation.
•IP Address Settings – the software installation process allows the server to dynamically assign IP Address settings. If your application requires static setting of specific address information you will need to know:
•IP Address
•Subnet Mask
(for Bridged Ethernet applications only)
• Default Gateway
(for Bridged Ethernet applications only)
•Name Server Information – the software installation process allows the server to dynamically assign Name Server Address settings.
If your application requires static setting of specific address information you will need to know:
•Primary DNS Address
•Secondary DNS Address
•Primary WINS Address
•Secondary WINS Address
•Type of Driver to be installed – WAN and LAN software drivers are supported.
* Note: Required if not using default value
8