DSLAAU Manual
*Note: The encapsulation types that appear in the
9.The “Ready to Install” window will be displayed.You may review the current settings and click <Back to change the settings, or click Next> to accept the current settings.
10.A message will be displayed indicating that the drivers are being installed.
* Note: You may need the Windows CD to complete the installation.
11.The system must be rebooted to have the new settings take effect, therefore the “Reboot” window will appear. Remove all disks from their drives, select <Yes>, reboot the computer now; and click <Close> to reboot.
12.Once the PC has rebooted, installation of corega DSLAAU is complete.
13