DSLAAU Manual
•Encapsulation type
* Note: Required if not using default value
•Modulation type
* Note: Required if not using default value
•User Name (for PPP applications only)
•Password (for PPP applications only)
3.2 Windows Installation
The software setup process for Microsoft Windows applications (XP, 2000, Me, 98 SE, and 98) is described below with operating system specific differences noted. corega DSLAAU should be connected to your PC prior to installing the driver software. No other Windows programs should be running on your PC during the software install process.
*Note: The appearance of the windows and the wording of the options may be slightly different for each operating system, but the same procedure applies.
•Installing the Driver Software
1.In the procedure that follows, we shall refer to the folder where the driver files reside as the Device Driver Folder.
2.An informational message may be displayed. If so, click Next> to start the installation.
3.A window will appear asking what you want the system to do.The recommended option will always search for the appropriate driver software. Select the recommended option by clicking on the radio button to its left, and click Next>
9