DSLAAU Manual
3.4 MAC OS X Installation
When installing corega DSLAAU on a Macintosh running OS X, you will need to install the drivers first, then plug the USB cable from your modem to the computer.
*Note: This device driver supports MAC OS X 10.1.x and above. It does not support MAC OS X 10.0.
•Installing the Driver Software
1.In the procedure that follows, we shall refer to the folder where the driver files reside as the Device Driver Folder.
2.In the Device Driver Folder, locate the Installer application and invoke it by
3.The “Welcome” screen will appear; click <Next> to proceed.
4.Enter the administrator login and password on the “Authenticate” screen and click <OK>.
5.When all necessary files have been copied, the “Finished” screen will
15