Cisco Systems 4027673 How Do I Mount the Cable Modem on the Wall?, Before You Begin

Page 18

How Do I Mount the Cable Modem on the Wall?

How Do I Mount the Cable Modem on the Wall?

Before You Begin

Before you begin, choose an appropriate mounting place. The wall can be made of cement, wood, or drywall. The mounting location should be free of obstructions on all sides, and the cables should be able to easily reach the cable modem without strain. Leave sufficient clearance between the bottom of the cable modem, and any flooring or shelving underneath, to allow access to cabling. In addition, leave enough slack in all cables so that the cable modem can be removed for any required maintenance without disconnecting the cables. Also, verify that you have the following items:

Two wall anchors for #8 x 1-inch screws

Two #8 x 1-inch pan head sheet metal screws

Drill with a 3/16-inch wood or masonry bit

A copy of the wall-mounting illustrations shown on the following pages

Mounting Instructions

You can mount the DPC3010 and EPC3010 cable modem directly on a wall using two wall anchors, two screws, and the mounting slots on the bottom of the modem. The modem can be mounted vertically or horizontally. Mount the modem as shown in the following illustration.

18

4030802 Rev A

Image 18
Contents Important Safety Instructions This DocumentImportant Safety Instructions Mitteilung für CATV-Techniker Aviso a los instaladores de sistemas CatvPower Source Warning Verify the Power Source from the On/Off Power Light Ground the Product Protect the Product from LightningProtect from Exposure to Moisture and Foreign Objects Service Warnings Check Product Safety Protect the Product When Moving ItDeclaration of Conformity FCC ComplianceUnited States FCC Compliance Canada EMI RegulationCE Compliance CEModem/EMTA Home Networking Benefits and FeaturesIntroducing the DPC3010 and EPC3010 PerformanceDesign and Function ManagementWhats in the Carton? Front Panel Description Back Panel Description Minimum System Requirements for Macintosh What Are the System Requirements for Internet Service?Minimum System Requirements for a PC System Requirements for an Ethernet ConnectionHow Do I Set Up My High-Speed Internet Access Account? Do Not Have a High-Speed Internet Access AccountAlready Have an Existing High-Speed Internet Access Account Where Is the Best Location for My Cable Modem? How Do I Mount the Cable Modem on the Wall? Before You BeginMounting Instructions Location and Dimensions of the Wall-Mounting Slots Wall Mounting Instructions Connecting and Installing Internet Devices How Do I Connect My Devices to Use the Internet?To connect devices Connecting the Cable Modem for High-Speed Data Service Connecting the Cable Modem for High-Speed Data Service Installing USB Driver Installing USB DriversInstalling USB Drivers Installing USB Drivers on Windows XP Systems Frequently Asked Questions How Do I Configure TCP/IP Protocol?Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems Configuring TCP/IP on Windows 2000 Systems Configuring TCP/IP on Windows XP SystemsConfiguring TCP/IP on Macintosh Systems How Do I Renew the IP Address on My PC? What if I dont subscribe to cable TV? How do I arrange for installation?Renewing the IP Address on Windows NT, 2000, or XP Systems How does the cable modem connect to my computer?Can I run more than one device on the modem? Common Troubleshooting IssuesDont understand the front panel status indicators Cable modem does not register an Ethernet connectionTips for Improved Performance Check and CorrectFront Panel LED Status Indicator Functions Initial Power Up, Calibration, and RegistrationPower Online Link Normal OperationsFront Panel LED Status Indicators During Special Conditions Special ConditionsDocumentation Copyright Notice TrademarksDisclaimer Software and Firmware Use NoticeFor Information If You Have Questions