Installing USB Driver
Installing USB Driver
To install USB drivers, your PC must be equipped with a USB network interface and a Microsoft Windows 2000 or Windows XP operating system. This section contains instructions for installing the USB drivers for the cable modem.
The USB drivers needed for your cable modem are located in the Roof direcdtory of the Installation CD provided with your cable modem.
Note: If you are not using the USB interface, skip this section.
Installing USB Drivers
The USB driver installation procedures are different for each operating system. Follow the appropriate instructions in this section for your operating system.
Installing USB Drivers
1Insert the Installation CD into the
2Make sure the power is connected to your cable modem and that the POWER LED status indicator on the front panel of the cable modem illuminates solid green.
3Connect the USB cable to your computer's USB port. Then, connect the other end of the USB cable to the USB port on the gateway.
4Click Next in the Found New Hardware Wizard window.
5Select Search for a suitable driver for my device (recommended) in the Found New Hardware Wizard window, and then click Next.
6Select
7Click Next in the Found New Hardware Wizard window. The system searches for the driver file for your hardware device.
8After the system finds the USB driver, the Digital Signature Not Found window opens and displays a confirmation message to continue the installation.
9Click Yes to continue the installation. The Found New Hardware Wizard window reopens with a message that the installation is complete.
10Click Finish to close the Found New Hardware Wizard window. The USB drivers are installed on your PC, and your USB devices are ready for use.
11Try to access the Internet. If you cannot access the Internet, go to Frequently Asked Questions (on page 26). If you still cannot access the Internet, contact your service provider for further assistance.
24 | 4030802 Rev A |