Danaher Motion Superior Electric
Section 3: Installation Guidelines
3.1MOUNTING
The
Figure 3.1 Mounting Diagram
Case temperature should not exceed +70° C (+158° F). Forced air cooling may be required to maintain temperature within the stated limits.
When selecting a mounting location, it is important to leave at least two inches (51mm) of space around the top, bottom and sides of the unit to allow proper airflow for cooling.
It is also important to keep the drive away from obvious noise sources. If possible, locate the drive in its own metal enclosure to shield it and its wiring from electrical noise sources. If this cannot be done, keep the drive at least three feet from any noise sources.
SS2000MD4 | 8 |