Table of Contents, Precautions please read before use

Model X-34 Owner’s Manual

Thank you for purchasing the Fostex Model X-34 multitracker.

The X-34 is a four-track, four-channel cassette tape recorder that features four line inputs, plus two inputs that accept a range of inputs from line level to mic level. Each channel module is equipped with a two-band EQ for superior sound quality. The X-34 also provides flexible elements, such as the AUX send/return connectors for applying desired external effects and the recording track-select switches that enable you to specify any track as the recording destination. A speed of 9.5cm/s and Dolby B type noise reduction ensure high quality recording. In particular, the exclusive Fostex “Auto Bounce function” makes ping-pong recording a breeze.

The X-34 contains a “Rehearsal” mode, which is convenient for punching in and out. You can practice until you are ready to record.

Please read this owner’s manual thoroughly before using the X-34 to make the best use of its features and extend the useful life of the unit.

Table of Contents
Precautions (please read before use)	3
Cautions for Using the X-34	4
Before Using the X-34	4
<Top Panel>	5
<Front panel>	7

*Do not plug in or unplug the AC adapter with wet hands. Doing so may result in dangerous electrical shock.

*Do not open the unit or touch any parts inside. Doing so may result in a dangerous electrical shock, and may damage the unit.

<Rear Panel>	8
Basic Operation: “Let’s Record!”	9
Initial mode after the X-34 is powered on:	9
Initial setup of the X-34	9
Remember the following before you start to record! ....	10
Basic Recording - 1 (Recording from the front
panel LINE IN/INSERT jack)	12
Basic Recording - 2 (Recording with the rear
panel MIC IN jack)	14
Basic Playback Procedure	15
Multitrack Recording	16
Overdubbing	16
<Overdubbing Electric Bass in Track 2 While
Listening to the Drum Track>	16
Mixdown (Track Down mode)	18
Advanced Operation	19
Punch In/Out Recording	19
Ping-pong Recording
(Using the Auto Bounce Function)	21
Tape Sync	23
Recording a sync signal	24
Applying Effects	25
Troubleshooting	27
Maintenance	28
Block Diagram	28
Specifications	29
Declaration of EC Directive	30
The Affect of Immunity on This Equipment	30
FOSTEX DISTRIBUTORS LIST IN EUROPE	30

Precautions (please read before use)

Power supply

*When unplugging the AC adapter from an outlet, be sure to grasp the adapter. Attempting to unplug it by pulling on the AC cable may damage the wiring.

*It is dangerous to use any power cable that is cut or frayed. If the power cable is damaged, immediately stop using it and have the unit repaired.

*Do not let water or other liquids, flammable materials, or metal objects such as pins get inside the unit.

These items may cause electrical shock or short circuit the X-34 and damage it.

If the X-34 should become wet, unplug the AC adapter from the AC outlet, and contact your authorized service station.

*When turning the power on, turn the X-34 on first before turning on any connected equipment. Doing so will avoid damaging to the other equipment.

Also, when connecting or disconnecting cables to or from the X-34’s input or output jacks, set all faders to “0.”

*When the AC adapter is connected to an AC outlet, it will continue to draw a small amount of power even if the switch is set to off (STANDBY).

If you will not be using the X-34 for an extended period of time, be sure to unplug the AC adapter from the outlet.

Location

Avoid using the X-34 in the following locations:

*Locations of extreme low or high temperatures, or subject to extreme changes in temperature.

*Locations with excessive moisture or dust.

*Locations subject to direct sunlight for an extended period of time, or near a stove or other source of heat.

*Locations subject to fluctuations in electrical voltage.

*Unstable locations or locations subject to heavy vibration.

*Near strong magnetic fields (e.g., on top of a television or speaker).