After login, the following page is the Basic Configuration page, explained in detail in Table 6: Web Login Definition.
TABLE 6: WEB LOGIN DEFINITIONS (BASIC SETTINGS PAGE)
|
|
|
|
| Web Access | Select HTTP or secure HTTPS protocol for Web Access | |
| Web Port | By default, HTTP uses port 80 and HTTPS uses port 443. This field is for customizable | |
|
| web port. | |
| Enduser Password | This contains the password to access the Enduser Web Configuration Menu (Status and | |
|
| Basic Settings). This field is case sensitive with a maximum length of 25 characters. | |
| IP Address | There are two modes to operate the GXW410x: | |
|
| DHCP mode: all the field values for the Static IP mode are not used (even though they are | |
|
| still saved in the Flash memory.) The GXW410x acquires its IP address from the first | |
|
| DHCP server it discovers from the LAN it is connected. | |
|
| Using the PPPoE feature: set the PPPoE account settings. The GXW410x will establish a | |
|
| PPPoE session if any of the PPPoE fields is set. | |
|
| Static IP mode: configure the IP address, Subnet Mask, Default Router IP address, DNS | |
|
| Server 1 (primary), DNS Server 2 (secondary) fields. | |
| DHCP hostname | This option specifies the name of the client. This field is optional but may be required by | |
|
| some Internet Service Providers. Default is blank. | |
| DHCP domain | This option specifies the domain name that client should use when resolving hostnames | |
|
| via the Domain Name System. Default is blank. | |
| DHCP vendor class ID | Used by clients and servers to exchange vendorspecific information. Default is | |
|
| Grandstream GXW410x. | |
| PPPoE account ID | PPPoE user name. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol | |
|
| over Ethernet) connection. | |
| PPPoE password | PPPoE account password. | |
| PPPoE Service Name | This field is optional. If your ISP uses a service name for the PPPoE connection, enter the | |
|
| service name here. Default is blank. | |
| Preferred DNS server | This field will let the user enter a preferred DNS server to be used instead of the one | |
|
| acquired by the service provider. | |
| Time Zone | Controls how the date/time is displayed according to the specified time zone. | |
| Allow DHCP Option 2 | Default is No. If set to Yes, time zone settings will originate from the DHCP server. | |
| to override Time Zone |
|
|
| Settings |
|
|
|
|
|
|