Daylight Savings Time
This parameter controls whether the displayed time will be daylight savings time or not. If set to “Yes” and the Optional Rule is empty, then the displayed time will be 1 hour ahead of normal time. The “Automatic Daylight Saving Time Rule” shall have the following syntax: starttime;endtime;saving
Both starttime and endtime have the same syntax: Month ,day ,weekday ,hour ,minute
month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
day: [+]1,2,3,..,31
weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight saving rule is not based on week days but based on the day of the month.
hour: hour (023),
minute: minute (059)
If “weekday” is 0, it means the date to start or end daylight saving is at exactly the given date. In that case, the “day” value must not be negative.
If “weekday” is not zero and “day” is positive, then the daylight saving starts on the first “day”th iteration of the weekday (1st Sunday, 3rd Tuesday etc). If “weekday” us not zero and “day” is negative, then the daylight saving starts on the last “day”th iteration of the weekday (last Sunday, 3rd last Tuesday etc). The saving is in the unit of minutes. The saving time may also be preceded by a negative () sign if subtraction is desired instead of addition. The default value for “Automatic Daylight Saving Time Rule” shall be set to “03,11,0,02,00;11,04,0,02,00;60” which is the rule for US.
Examples:
US where daylight saving time is applicable: 03,11,0,02,00;11,4,0,02,00;60
This means the daylight saving time starts from 11th March at 2AM and ends November 4th at 2AM. The saving is 60 minutes (1hour).
You may also access the Device Status page which provides details of the GXW product. The Device Status page terms are defined in Table 7: Status Page Definitions.
TABLE 7: STATUS PAGE DEFINITIONS
|
|
|
|
| Hardware Revision | Hardware version number: Main Board, Interface Board | |
| MAC Address | The device ID in HEX format. This is a very important ID for ISP troubleshooting. | |
| IP Address | This field shows WAN IP address of GXW410x | |
| Product Model | This field contains the product model info (GXW4104 or GXW4108) | |
| Software Version | Program: This is the main software release. Boot and Loader are not changed often. | |
| System Up Time | This field shows system up time since the last reboot. | |
| Registered | This field indicates whether the different SIP Accounts configured under Channels page | |
|
| are successfully registered to the SIP server(s). | |
|
|
|
|