DTMF Payload | This parameter sets the payload type for DTMF using RFC2833. Default is 101. | |
Type |
|
|
Syslog Server | The IP address or URL of System log server. This feature is especially useful for ITSP (Internet | |
| Telephone Service Provider) | |
Syslog Level | Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, INFO, | |
| WARNING or ERROR. Syslog messages are sent based on the following events: | |
| 1. | product model/version on boot up (INFO level) |
| 2. | NAT related info (INFO level) |
| 3. | sent or received SIP message (DEBUG level) |
| 4. | SIP message summary (INFO level) |
| 5. | inbound and outbound calls (INFO level) |
| 6. | registration status change (INFO level) |
| 7. | negotiated codec (INFO level) |
| 8. | Ethernet link up (INFO level) |
| 9. | SLIC chip exception (WARNING and ERROR levels) |
| 10. | memory exception (ERROR level) |
| The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following | |
| components: GS_LOG: [device MAC address][error code] error message | |
| Example: May 19 | 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet link is up |
NTP server | URI or IP address of the NTP (Network Time Protocol) server, which will be used by the phone to | |
| synchronize the date and time. | |
Allow DHCP | Default value is No. If set to Yes, the NTP server will originate from the DHCP server. | |
Option 42 to |
|
|
override an NTP |
|
|
server |
|
|
Enable Video | When set to Yes, GXW410x will start converting video feed received from analog camera to IP | |
Surveillance | packets. In order to view this video feed, please follow instructions given under Video Surveillance | |
| chapter on page 23. | |
RTSP Port | By default it is 554. | |
|
|
|