Sprint Nextel EX720 manual Sprint Connection Device Settings, User Lock Code

Applying your Roaming Preference

1.Click OK or Apply on the Settings dialog box to reset your card. When you apply your roaming preference the following dialog will appear: “Roaming setting was changed successfully. Please wait while modem is reset for the changes to take effect.”

2.Click OK to close the dialog box.

3.Wait for the card to reset. (This may take a moment.) When the device is reset the Go button will be visible and the Connection Manager User Interface will display “Disconnected.”

Tip:

When you change your roaming preference an informational message will appear in your system tray.

Sprint Connection Device Settings

Activation Wizard – This option is used only when activating a new Sprint device. To manually activate your Sprint account click Activation Wizard. (See “Activating Your Sprint Mobile Broadband Express Card” on page 24.)

Change User Lock – This option enables you to change and customize your user lock code. (See below for more information on using your user lock code.)

User Lock Code

The Lock Code feature can be used to prevent others from using your Express Card and your account. When the lock code is enabled, the message area will display “Device Locked” and the lock icon will appear in the indicator area.

While the Express Card is in lock mode, you can not launch a data session without first entering your four-digit lock code. The default lock code is the last four digits of your Sprint

64 Section 2C: Menu Options