Scientific Atlanta DPX100 manual Cleaning the Equipment, Placement, Accessories, Ventilation

Page 3

IMPORTANT RULES FOR SAFE OPERATION, continued

Cleaning the Equipment

Before cleaning this equipment, unplug it from the electrical outlet. Use a damp cloth to clean this equipment. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this equipment.

Placement

Place this equipment in a location that is close enough to an electrical outlet to accommodate the length of the power cord. Place this equipment on a stable surface.

The surface must support the size and weight of this equipment. Place this equipment either horizontally or vertically.

WARNING:

Avoid personal injury and damage to this equipment. An unstable surface may cause this equipment to fall.

Accessories

Do not use accessories with this equipment unless recommended by your cable service provider.

Ventilation

This equipment has openings for ventilation that protect it from overheating. To ensure the reliability of this equipment, do not obstruct the openings.

Do not place other equipment, lamps, books, or any other object on the top of or beside this equipment.

Do not place this equipment in any of the locations that follow:

-On a bed, sofa, rug, or similar surface

-Over a radiator or a heat register

-In an enclosure, such as a bookcase or equipment rack, unless the installation provides proper ventilation

Overloading

Do not overload electrical outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock. For equipment that requires battery power or other sources to operate, refer to the operating instructions for that equipment.

3

Image 3
Contents Model DPX100 Cable Modem Read and Retain These Instructions Important Rules for Safe OperationVentilation Cleaning the EquipmentPlacement AccessoriesObject and Liquid Entry Lightning and Power SurgesPower Cord Protection Power SourcesEquipment Checklist Damage that Requires ServiceContents WebSTAR Cable Modem FeaturesOverview Before You Begin Contacting Your Local Cable Service ProviderSystem Requirements IntroductionSelecting a Location for Your Modem WebSTAR Cable Modem Front Panel Front Panel IndicatorsThis button is for maintenance purposes only. Do not use WebSTAR Cable Modem Back PanelBack Panel Components To install the USB Drivers for USB-see USB Modem InstallationInstalling the Modem See TCP/IP ConfigurationWindows 95/98/ME TCP/IP ConfigurationRenewing the IP Address for Windows 95/98/98SE/ME TCP/ IP Configuration WindowsMacintosh TCP/IP Configuration Windows 98/98SE/ME USB Driver InstallationWindows Windows XP Frequently Asked Questions TroubleshootingCommon Troubleshooting Issues Modem does not register an Ethernet connectionModem does not register a cable connection Check and Correct Tips for Improved PerformanceDetailed Front Panel Indicator Functions Duringi Normall Operationsti Power OFF Slow Blinking Software Use Notice TrademarksDisclaimer Documentation Copyright NoticeUnited States FCC Compliance Canada EMI RegulationTelephone
Related manuals
Manual 26 pages 23.96 Kb