Scientific Atlanta DPX100 manual WebSTAR Cable Modem Back Panel, Back Panel Components

WebSTAR Cable Modem Back Panel

12VDC	POWER	1
	RESET	2
	ETHERNET
		3
	USB	4

CABLE ININ 5

T9917

Back Panel Components

1	POWER	Connects the cable modem to the DC output of the AC power
		adapter that is provided with your cable modem
		Note: Only use the power cord and the AC power adapter that are
		provided with your cable modem.
2	RESET	Reset-to-Default button (Factory Reset)
			CAUTION:
			This button is for maintenance purposes only. Do not use!
3
	ETHERNET	RJ-45 Ethernet port connects to the Ethernet port on your PC
4	USB	12 Mbps USB port connects to the USB port on your PC
5	CABLE IN	F-Connector connects to an active cable signal from your cable
		service provider
			CAUTION:
			Do not connect your PC to both the Ethernet and USB ports at
			the same time.
		Note: You can connect two separate PCs to the cable modem at
		the same time by connecting one to the Ethernet port and one to
		the USB port. See Modem Installation next in this guide.

10