Scientific Atlanta DPX100 manual WebSTAR Cable Modem Front Panel, Front Panel Indicators

Page 9

WebSTAR Cable Modem Front Panel

POWER

PC

DATA CABLE

Front Panel Indicators

 

 

1

POWER

Illuminates solid green to indicate that power is being applied to the cable

 

 

 

 

 

modem

 

 

 

2

PC

Illuminates solid green to indicate that an Ethernet/USB carrier is

 

 

 

 

 

present

 

 

 

 

 

Blinks to indicate that Ethernet/USB data is being transferred between

 

 

 

 

 

the PC and the cable modem

 

 

 

3

DATA

Blinks to indicate that data is being transferred between the modem and

 

 

 

 

 

the cable network

 

 

1

4

CABLE

Illuminates solid green when the modem is registered on the network and

 

 

 

 

fully operational. This indicator blinks to indicate one of the following

 

 

2

 

 

 

 

 

 

conditions:

 

 

3

 

 

 

 

 

 

• The cable modem is booting up and not ready for data

 

 

 

 

 

 

4

 

 

 

 

 

 

• The cable modem is scanning the network and attempting to register

 

 

 

 

 

 

 

 

 

 

• The cable modem has lost registration on the network and will continue

 

 

 

 

 

blinking until it registers again

 

 

 

 

 

• Blinks very slowly (once every 5 seconds) to indicate that Cable Modem

 

 

 

 

 

Access Protection is enabled

 

 

 

 

 

Note: Once the cable modem is successfully registered on the network, the

 

 

 

 

 

POWER and CABLE indicators illuminate continuously to indicate that the

 

 

 

 

 

cable modem is active and fully operational.

 

T9916

 

 

See Detailed Front Panel Indicator Functions later in this guide for more

 

 

 

 

 

information on front panel indicator functions.

9

Image 9
Contents Model DPX100 Cable Modem Read and Retain These Instructions Important Rules for Safe OperationPlacement Cleaning the EquipmentAccessories VentilationPower Cord Protection Lightning and Power SurgesPower Sources Object and Liquid EntryEquipment Checklist Damage that Requires ServiceContents WebSTAR Cable Modem FeaturesOverview Before You Begin Contacting Your Local Cable Service ProviderSystem Requirements IntroductionSelecting a Location for Your Modem WebSTAR Cable Modem Front Panel Front Panel IndicatorsThis button is for maintenance purposes only. Do not use WebSTAR Cable Modem Back PanelBack Panel Components Installing the Modem Modem InstallationSee TCP/IP Configuration To install the USB Drivers for USB-see USBWindows 95/98/ME TCP/IP ConfigurationRenewing the IP Address for Windows 95/98/98SE/ME TCP/ IP Configuration WindowsMacintosh TCP/IP Configuration Windows 98/98SE/ME USB Driver InstallationWindows Windows XP Frequently Asked Questions TroubleshootingCommon Troubleshooting Issues Modem does not register an Ethernet connectionModem does not register a cable connection Check and Correct Tips for Improved PerformanceDetailed Front Panel Indicator Functions Duringi Normall Operationsti Power OFF Slow Blinking Disclaimer TrademarksDocumentation Copyright Notice Software Use NoticeUnited States FCC Compliance Canada EMI RegulationTelephone
Related manuals
Manual 26 pages 23.96 Kb