8.Click Finish to exit the Installation program. The Install window will appear (see Figure 6).
Figure 6: Install window
9.You are required to restart your computer in order to complete the Wireless Connection Manager Software installation procedure. Click OK to reboot your computer.
10.Once your computer has rebooted, insert the PCS Connection Card into your computer’s PC card slot (see “Inserting and Removing Your PCS Connection Card” on page 12 for more information). Windows will detect the new hardware and will install the necessary
drivers. The Found New Hardware window or Found New
Hardware Wizard will appear, depending on your operating system (see Figure 7).
Figure 7: Found New Hardware window
Note: If the message “Digital signature not found” appears, you will need to click Yes to properly install the hardware driver. When installing to Windows 2000 or Windows XP, the message will appear three times; click Yes each time to properly install the driver.
Section 1
Getting Started With Your PCS Connection Card 11