| |
| A |
2. | 1. |
| |
| Figure 10. |
Operating the Shredder
Figure 10.
1.Press the forward button 
to turn the shredder on. The green light 
shows that the shredder is ready to operate.
2.Feed paper in to the middle of the the throat. An auto sensing photo cell detects the paper and starts the machine. The shredder stops automatically when no more paper is inserted.
Standby Mode
After one hour of inactivity, the shredder goes into standby and the green LED 
turns off. Repeat step 1 above to turn the shredder back on.
Figure 11.
Sheet Capacity Indicator Figure 11.
The shredder has an ECC (electronic capacity control) which indicates the sheet capacity being used during shredding (A).
Red LED (A).
The shredder stops automatically if too much paper is inserted. The paper is reversed.
Yellow LED (B).
Maximum sheet capacity during shredding.
Green LED (C).
Normal capacity during shredding.