ADVANCED PRODUCT FEATURES
SilentShred™ Technology SilentShred™ noise quality shreds without noisy disruptions
SHEET CAPACITY SENSOR
Sheet Capacity Sensor
Helps prevent paper jams by indicating sheet capacity levels during the shredding process
Safety Shield | 30 | Auto Shut Off | |
Electronically controlled | After 30 minutes of | ||
| |||
shield stops shredder |
| inactivity, shredder | |
when opened for |
| automatically turns off for | |
advanced safety |
| zero energy consumption |
Eliminates frustrating jams by preventing overloads.
| Electronically measures paper thickness to prevent | |
| paper jams: | |
| Up to RED: Too many sheets have been | |
| inserted. Automatic reverse of paper. | |
| Up to YELLOW: Maximum sheet capacity. | |
R | Up to GREEN: Normal sheet capacity | |
during shredding process. | ||
|
PRODUCT MAINTENANCE
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run even if there is no paper present (Note: two paper detection sensors are
located in the center of the paper entry).
TO CLEAN THE SENSORS |
|
|
|
1 | 2 | 3 | 4 |
Turn off and unplug | Locate | Use thin, | Clean any contamination |
shredder | infared sensor | to clean sensors. Make sure | from the paper sensors |
|
| brush is clean and dry |
|
OILING SHREDDER
All shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1 | 2 | 3 |
R |
| R |
|
| |
Set to Off (O) | *Apply oil | Set to Reverse (R) |
| across entry | seconds |
*Only use a
TROUBLESHOOTING
Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 3604101.
Safety Shield Indicator: When flashing alternatively with On/Off (
) LED, safety shield is open and shredding will stop. To resume shredding, make sure safety shield is closed.
Door Open Indicator: When flashing alternatively with On/Off (
) LED, safety shield is open. To resume shredding, make sure the door is closed.
Paper Capacity Indicator: When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper. See Paper Jam section below.
R Overheat Indicator: When flashing alternatively with On/Off (
) LED, shredder requires a 
) is blue, resume shredding
PAPER JAM
1
When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper
2 | 3 | 4 |
| R |
|
Gently pull uncut paper | If necessary, press | Shred 1 sheet of |
from paper entry | Reverse (R) to run | paper to clear |
| shredder in reverse and | cutters. Resume |
| then pull uncut paper | normal shredding |
| from shredder |
|