4. Trouble-shooting
Danger!
Disconnect from the mains before starting any service work or before removing the cover.
Malfunction:
Standby (5) is not lighting up / machine does not start.
Cause:
-Door / bale ejecting guard open
-Main switch “OFF“
-Emergency button is pressed
-Key switch is vertical
-Machine is plugged in
-
-Machine is overloaded - The motor protection switch releases the machine after approx.
2 min.
-Central lubrication IDEAL 4109
Malfunction:
Motor hums and has no power.
Cause:
One phase is missing.
Remedy:
Ensure that voltage is on all 3 phases
Malfunction:
Machine switches off during normal operation.
a) Cause:
Indicator for “Bag full“ / “baler full“ lights Shred bag / baler is full.
Remedy:
Renew plastic bag / empty baler.
b) Cause:
Machine is overloaded too frequently.
Remedy:
Check
Motor protection switch releases the machine after approx. 2 min.
15