ABC Office 4107 CC, 4109 CC Oiling the shredding mechanism, Replacing the plastic bag Ideal

Page 9

3.5 Oiling the shredding mechanism

If the sheet capacity reduces or after “bag full“ we recommend that you oil the shredding mechanism.

-Press the oilpump button 3 x.

-After lubrication let the machine run several times backwards and forwards alternately.

-If tank (8) is empty refill with oil. Type of oil: cutting head oil

3.6 Replacing the plastic bag (IDEAL 4107)

Replace bag when “bag full“ indicator lights.

-Open the door (9).

-Pull out the plastic bag holding the bottom of the bag.

-Push down the waste paper.

-Pull out the waste bag with frame (10) until it stops.

-Remove the round belt (11) from the waste bag frame.

-Tie the bag (for sealing parts and binding wires see accessories).

-Place a new bag into the bag frame (10) and turn the edge over the outside of the frame.

-Fasten the bag with the round belt. The round belt must fit into the channel of the bag frame.

-Push the bag frame into the machine and adjust the plastic bag with your foot.

-Close the door (9).

9

Image 9
Contents Ideal 4107 CC Ideal 4107 Ideal Table of contents Safety Instructions GeneralApplication Pre-assembly InstallationChecking rotating direction Power supplyOperation Operating elements IdealStarting the machine Switching off the machine Replacing the plastic bag Ideal Oiling the shredding mechanismOperation of baler Ideal Page Ideal 4107 Ideal Page Central lubrication Ideal Premature ejecting of bale IdealTrouble-shooting Technical data AccessoriesEG-KONFORMITÄTSERKLÄRUNG