WALL MOUNTING THE UNIT
1
A
2
A | A |
A | A |
B | B |
B | B |
Detach the stand cover by pulling it outward as per arrow A.
Remove the four (4) screws (A) using a phillips head screwdriver and remove the handle.
Remove the four (4) screws (B) using a phillips head screwdriver and remove the stand.
3 | This monitor conforms to the VESA Flat |
| Panel Mounting Physical Mounting Interface |
100mm x 100mm | Standard which defines a physical mounting |
Screw Mounting Options | interface for flat panel monitors, and |
100mm | corresponding standards for flat panel |
| monitor mounting devices, such as wall and |
| table arms. The VESA mounting interface is |
100mm | located on the back of your monitor. The |
| VESA Mounting slots of this model are |
| located inside the handle cover (shown in |
| the following figure). |
| To mount the monitor on a swing arm or |
4mm, 0.7pitch threaded | other mounting fixture, follow the instruction |
holes x4 | included with the mounting fixture to be |
| used. |
16 |
|