REMOTE CONTROL
BATTERY INSTALLATION
1
+
+
Open the battery compartment cover by pushing in on the tab, then lifting it up.
Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment. Replace the battery compartment cover.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries speciřed.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
15 ft
30° 
30°
NOTES:
• When there is an obstacle between the TV and the transmitter, the transmitter may not operate.
• When direct sunlight, incandescent lamp, Ŗuorescent lamp or any other strong light shines on the Remote Sensor of the TV, the remote operation may be unstable.
FAQs:
•WhyTheis theremoteremotecontrolcontrolis nott aimedworkingatproperly?the sensor.
• The remote control is too far away from the remote sensor.
• There is too much light in the room.
• There is an obstacle in the path of the beam.
• The batteries are weak or dead.
• The batteries are inserted incorrectly.
• The TV is not plugged in.
7