Memorex MT1701 manual TV Menus, Audio Menu Video Menu, System Menu, Sharp

TV MENUS

WhenTV MODEthe TV is set to the TV mode, the menu lets you customize the unit by allowing you to change various settings as follows:

1.	Press the MENU button on the main unit or the ® button 1 on the remote to access
2.	the on-screen menu.
	Select one of the options at the top of the screen (AUDIO, VIDEO, SYSTEM, C.C. or
3.	V-CHIP) using the Navigation g 2 or c 3 button.
	Use the Navigation a 4 or e 5 button to select one of the setup options, then press
	the Navigation g 2 or c 3 button to adjust it as per the following steps.

YOU MUST BE IN TV MODE TO ACCESS THESE MENUS. TO ENTER TV MODE, SIMPLY PRESS THE TV/AV/PC BUTTON UNTIL TV OR CATV APPEARS ON THE SCREEN.

AUDIO MENU VIDEO MENU

4

2 3

5

1

TREBLE 1

BASS 2

BALANCE 1

If AUDIO option is selected, you can set the following: Adjust for best treble (high) response.

TREBLE:Adjust for best bass (low) response.

BASS: Adjust for best balance between the left and

rightBALANCE:speakers. Usually setting this option in the middle is optimal.

1

AUDIO VIDEO SYSTEM C. C. V-CHIP

BRIGHT

PICTURE

COLOR

HUE

SHARP

If VIDEO option is selected, you can set the following: Adjusts the brightness of the image.

BRIGHT: Adjusts the contrast of the image.

PICTURE:Adjusts the color intensity.

COLOR:.Adjusts the red-green color balance of the unit.

SHARP:

HUE: Adjusts the sharpness of the image.

SYSTEM MENU

1

AUDIO VIDEO SYSTEM C. C. V-CHIP

If SYSTEM option is selected, you can set the following: Adjust the MTS setting to select the desired audio

optionMTS: (STEREO, SAP or MONO). You can also select the desired audio option using the remote, see page 25.

Select YES to mute the sound or NO for normal soundMUTE:. You can also mute the TV using the remote, see

page 25. Select a language, which is used for the on- screenLANGUAGE:display (ENGLISH, JAPANESE or CHINESE).

Select a desired sleep time of 30, 60 or 90 minutesSLEEP:. The TV will then turn off after the selected amount of time.

Select CATV if using cable television or TV if usingTV/CATV:an outdoor antenna.

pageCH. SEARCH:22). Select YES to start auto channel scan (see Select YES to add a channel into memory

orCHNO. MEMORto removeY: a channel from memory (see page 23).

RECALL: Select YES to recall the original video setting.

17