Sony RMO-S551 manual Installation Procedure on WindowsNT

Page 7

SMO-F551 / RMO-S551 Installation Guide

Installation Procedure on WindowsNT

Requirement:

1. SCSI host adapter

SCSI host adapter controls the command and data transfer between MO drive and host computer. (Ex. AHA-2940, AHA-3940)

2. Device driver

Device driver controls MO drive. WindowsNT include the Device Driver. If you use RMO-S551, we recommend to use the “Formatter One Pro TM” is supplied with RMO- S551.

3. SCSI cable

SCSI cable is used for connecting host adapter and MO drive. Please select proper SCSI cable.

4. Format Utility software

Format utility software is used to format media and make partitions. Format utility is often supplied with SCSI host adapter. If you use RMO-S551, we recommend to use the “Formatter One Pro TM” bundled with RMO-S551.

Installation:

1)Connection

-Set the SCSI host adapter into the host computer.

-Attach the MO drive using proper SCSI cable.

-Set proper SCSI ID and termination on the MO drive.

2)No device driver

2)-1 Preparation

-Turn on the drive and insert the media.

-Turn on the power of the host system and boot WindowsNT.

-Let it Autoconfigure the hardware.

2)-2 Format the media and partition

a)Click the Start button and point to Program “Administrative Tools”. Click on Disk Administrator

- Verify to write signature to the media.

- Highlight the drive icon to be partitioned. - Click on File, then Create Partition

- Choose partition parameters and click OK.

- Close Disk Administrator....save changes when asked.

7

Image 7
Contents Magneto-Optical Disk Drive Contents Installation Installation Procedure on DOS and Windows3.1Requirements SMO-F551 / RMO-S551 Installation Guide To detect the connected hardware Installation Procedure on Windows95/98Requirement No device driver PreparationInstall the device driver Preparation Installation Procedure on WindowsNT Install the device driver Preparation Format and partition Installation Procedure on SUN SystemLogin Test equipmentSMO-F551 / RMO-S551 Installation Guide Port2# #hinv -c scsi Installation Procedure on Silicon Graphics SystemsMedia Initialization Fx r enter Repartition the mediaFx l enter Confirm the partition# mkdir /mo enter Fx exit enter Make a file systemPort0 7# mkfs /dev/rdsk/dks1d4s7 enter Mount the media# ioscan -fc disk enter Login Installation Procedure on HP Systems# diskinfo -v /dev /rdisk/c201d4s0 Enter # mkdir /mo Enter # mount /dev/dsk/c201d1s0 /mo Enter Edit disktab fileFormat Media # newfs /dev/rdsk/c201d1s0 Mediatype Enter# bdf /mo Enter ex.4.1GB Confirm the result of mount commandHardware Installation Installation Procedure on SantaCruzOperation SystemsMedia support AppendixMedia information table