Sony RMO-S551 manual Contents

Page 2

SMO-F551 / RMO-S551 Installation Guide

Contents

Installation Procedure on DOS and Windows3.1	3
Installation Procedure on Windows95/98	5
Installation Procedure on WindowsNT	7
Installation Procedure on SUN Systems	9
Installation Procedure on SGI Systems	11
Installation Procedure on HP Systems	15
Installation Procedure on SCO Systems	18
Appendix	19

Printing History
July 24,	1998	Version 1.1
March 1,	1999	Version 1.2
November 1, 1999		Version 1.3

Note:

SMO-F551 / RMO-S551 support many kind of MO media, but all kind of MO media can not be used in each Operation System. (Refer page19 table-1,-2) Please choose suitable MO media in accordance with supported media table.

2

Image 2

Contents Magneto-Optical Disk Drive Contents Requirements Installation Procedure on DOS and Windows3.1Installation SMO-F551 / RMO-S551 Installation Guide No device driver Preparation Installation Procedure on Windows95/98Requirement To detect the connected hardwareInstall the device driver Preparation Installation Procedure on WindowsNT Install the device driver Preparation Test equipment Installation Procedure on SUN SystemLogin Format and partitionSMO-F551 / RMO-S551 Installation Guide Media Initialization Installation Procedure on Silicon Graphics SystemsPort2# #hinv -c scsi Repartition the media Fx r enterConfirm the partition Fx l enterMount the media Fx exit enter Make a file systemPort0 7# mkfs /dev/rdsk/dks1d4s7 enter # mkdir /mo enter# diskinfo -v /dev /rdisk/c201d4s0 Enter Installation Procedure on HP Systems# ioscan -fc disk enter Login # newfs /dev/rdsk/c201d1s0 Mediatype Enter Edit disktab fileFormat Media # mkdir /mo Enter # mount /dev/dsk/c201d1s0 /mo EnterConfirm the result of mount command # bdf /mo Enter ex.4.1GBInstallation Procedure on SantaCruzOperation Systems Hardware InstallationMedia information table AppendixMedia support