SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on SUN System
Test equipment:
The following procedure was confirmed with the following system and drive combination:
Host: | SUN Ultra Enterprise 450 |
OS: | Solaris 2.3, Solaris 2.4, Solaris 2.5.1, Solaris 2.6 |
Target: | |
| - device type is set to 0 |
| - 512 byte/sector media is used. |
Since the SCSI driver “sd” which comes with the SUN’s UNIX system is for device type 0 (hard disk drive, in general), the cases with device type 7 or 1024 bytes/sector media are not supported.
Installation:
1)Connection
-Set the SCSI host adapter into the host computer using proper SCSI cable.
-Set proper SCSI ID on the MO drive.
-Set proper termination.
-Set the Device Type 0.
2)Login
-Turn on the MO drive and the host computer.
-Login as root or be a super user with “su” command.
3)Format and partition
To make a disk accessible, perform the following three command:
-‘format’: using to format media.
-‘newfs’: using to make file system.
-‘mount’: using to mount media.
Create a ‘format.dat’ file prior to issuing the ‘format’ command
4)Edit “format.dat” file
-add following configuration to the “format.dat”.
#
#This is a list of sample Sony 5.25 inch MO disk configurations.
disk_type = "ISO 4X MO disk, 1150MB" ¥
:ctlr = SCSI : fmt_time = 2 ¥
:ncyl = 2261 : acyl = 2 : pcyl = 2263 : nhead = 32 : nsect = 31¥
:rpm = 3600 : bpt = 15872
disk_type = "ISO 8X MO disk, 2035MB" ¥
9