Sony RMO-S551 manual Install the device driver Preparation, Format the media and partition

Page 6

SMO-F551 / RMO-S551 Installation Guide

3)Install the device driver

3)-1 Preparation

-Turn on the MO drive and host computer.

-Install the device driver on Windows95/98 and reboot the host computer. (Please refer to the user’s guide of the Device Driver)

3)-2 Format the media and partition

- Format and Label the media using format utility software, such as “Formatter One Pro

TM”.

Note:

-Windows95/98 limits one partition size to 2.1GB, please make a partition under 2.1GB per partition.

-Don’t use floppy format for 4.8GB and 5.2GB Media, because the partition size is over 2.1GB.

-“Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some device driver or native Windows95/98 system do not support 4.8GB or 5.2GB media. Please confirm the proper media before using the device driver. If you have any question, please contact your dealer of the device driver.

-Windows95/98 does not support WORM media.

-Before rebooting a host PC, please don’t replace other media of a different sector size.

6

Image 6
Contents Magneto-Optical Disk Drive Contents Installation Procedure on DOS and Windows3.1 InstallationRequirements SMO-F551 / RMO-S551 Installation Guide No device driver Preparation Installation Procedure on Windows95/98Requirement To detect the connected hardwareInstall the device driver Preparation Installation Procedure on WindowsNT Install the device driver Preparation Test equipment Installation Procedure on SUN SystemLogin Format and partitionSMO-F551 / RMO-S551 Installation Guide Installation Procedure on Silicon Graphics Systems Port2# #hinv -c scsiMedia Initialization Repartition the media Fx r enterConfirm the partition Fx l enterMount the media Fx exit enter Make a file systemPort0 7# mkfs /dev/rdsk/dks1d4s7 enter # mkdir /mo enterInstallation Procedure on HP Systems # ioscan -fc disk enter Login# diskinfo -v /dev /rdisk/c201d4s0 Enter # newfs /dev/rdsk/c201d1s0 Mediatype Enter Edit disktab fileFormat Media # mkdir /mo Enter # mount /dev/dsk/c201d1s0 /mo EnterConfirm the result of mount command # bdf /mo Enter ex.4.1GBInstallation Procedure on SantaCruzOperation Systems Hardware InstallationAppendix Media supportMedia information table