Emotiva ERT-8.3 Speaker Installation Manual

Installing the Speakers

Positioning

Left and right front speakers should be positioned so that your TV is exactly centered between them. This will help focus your attention towards the screen.

For the best overall imaging, the left speaker should be set exactly the same distance and angle away from your listening position as the right speaker. It is recommended that you use a tape measure to set them up to be the same distance away within about half an inch tolerance.

If you have a smaller TV, the speakers should be no more than two feet away from the sides of the TV. If possible, have the center, left and right speakers at the same height (within two feet). This will help give a smooth transition when sound effects move from speaker to speaker.

Ideally, the speakers should be no closer than two feet from the rear and side walls in order to reduce any reflections that might upset imaging. If your speakers are closer than this, you can experiment by adding sound deadening material such as drapes on the walls to reduce any unwanted reflections.

ERT-8.3 Installation

•Outriggers

ERT-8.3 speakers have adjustable brushed aluminum outriggers for maximum stability. During shipping, they are set to the ‘in’ position. To adjust the outriggers to the ‘out’ position, gently place each ERT-8.3 on its back, and remove the screws holding the outriggers in place. Once the screws are removed, slide the outriggers outward, lining up the drilled holes in the outriggers with the threaded inserts in the bottom of the speaker cabinet and carefully replace and tighten the screws. Do not over-tighten.

•Outrigger Cones (feet)

Each ERT-8.3 comes with four brushed aluminum cones (or feet) that attach to the outriggers. These are located inside a cutout area in the top or bottom end caps of the ERT-8.3 packaging. Peel away the clear taps covering the cutout area and remove the cones, which are in individual plastic bags. Each cone is capped with a piece of felt on the narrow end, and topped with a screw at the wider end. Install the cones by carefully threading them into the screw inserts on the outer edge of the outriggers. The cones should fit snugly inside the circular recessed area around the screw inserts.

ERM Bookshelf Installations

If you are placing ERM speakers on a bookshelf or within a cabinet, allow room to the sides to eliminate unnecessary reflections and place the speaker close to the edge. In most cases you will select the Boundary Compensation switch to "ON"

When installing in bookshelves or other cavities with near field boundaries, set the Boundary Compensation switch to “ON”.

ERM Stand Mounting

If you are placing your ERM speakers on stands, be sure to place them at equal distances from the listening position with respect to the left and right sides. This will ensure the most accurate stereo or multichannel reproduction. Also, ensure the footprint of the speaker is well supported by the stand. The Boundary Compensation switch position on the ERM speaker will depend on the proximity to other walls or large furniture.

ERT-8.3, ERM-6.2, ERM-1, ERM-6.3 specifications

Emotiva, a prominent name in the audio equipment industry, has garnered attention with its ERM and ERT loudspeakers, providing high-quality sound reproduction for home theater and musical enthusiasts. Among their impressive lineup are the ERM-6.2, ERM-1, ERM-6.3, and ERT-8.3 models, each designed with distinct features and technologies that cater to different acoustic needs and preferences.

The ERM-6.2 is a versatile bookshelf speaker that excels in both compactness and performance. It incorporates a 6.5-inch woven fiber woofer that delivers deep bass while maintaining clarity in mids and highs. The 1-inch aluminum dome tweeter ensures a crisp and detailed upper range, making it suitable for both movie soundtracks and music. Notably, the ERM-6.2 employs advanced crossover technology, ensuring a seamless transition between drivers for a coherent listening experience.

Next in line is the ERM-1, a smaller bookshelf speaker that doesn’t compromise on sonic quality. It features a 5.25-inch polypropylene woofer designed to handle lower frequencies efficiently while providing a well-rounded sound signature. The 1-inch silk dome tweeter supports an airy and finely detailed treble response, making it an excellent choice for smaller rooms or as part of a surround sound setup.

The ERM-6.3 is a floor-standing speaker that boasts a larger footprint and enhanced audio capability. It integrates dual 6.5-inch woofers for substantial bass response while a 1-inch aluminum dome tweeter guarantees a wide soundstage. The design and engineering allow for a greater power handling capacity, ensuring that it can fill larger spaces with rich, immersive audio.

On the home theater front, the ERT-8.3 represents Emotiva's commitment to delivering exceptional surround sound experiences. This speaker system features an 8-inch woofers and dual 1-inch tweeters, producing robust bass and crystal-clear highs. Its unique design allows for flexible placement options, whether mounted on walls or used in conjunction with standard speakers.

Each model embodies Emotiva's dedication to quality craftsmanship and acoustic precision. Key technologies such as high-performance drivers, sophisticated crossover networks, and durable cabinet construction enhance overall performance. Collectively, the ERM-6.2, ERM-1, ERM-6.3, and ERT-8.3 appeal to audiophiles seeking refinement in sound reproduction, making them noteworthy options for both casual listeners and serious audio enthusiasts. With their diverse range of features and technologies, these Emotiva speakers offer something for everyone, reshaping how sound is experienced in any listening environment.