Extron electronic MP 101 user manual Back of the rack installation

1U Universal Rack Shelf	1/2 Rack Width
	Front False
	Faceplate 1/4 Rack Width
	Front False
	Faceplate	1/8 Rack Width
		Front False
		Faceplate

Both front false faceplates use 2 screws.

Use 2 mounting holes on opposite corners.

(2)4-40 x 3/16" Screws

Back of the rack installation

The MP 101 can be conveniently mounted on the rear of a rack by using the Extron MBB 100 Back of Rack Mounting Kit

(part #70-367-01). This mounting option allows the MP 101 to be vertically positioned.

1.Attach the two back of the rack mounting brackets to the sides of the MP 101, using the four included mounting screws.

2.Mount the unit on the rack, using the two included rack screws. The MP 101 can be vertically mounted facing in either direction, as shown in the following figure.

MP 101 Series • MP 101 2-7