Extron electronic user manual Mic input microphone level, MP 101 Series MP

SmoothRidges

A	A	SECTION A–A
	Power Supply	Tie Wrap
	Output Cord

3/16" (5 mm) Max

Orange Captive Screw

Connector

NYour MP 101 may have shipped with a blue captive screw plug. The blue connector does not have the extended tail or the included tie-wrap.

CDo not tin the stripped power supply leads before installing the captive screw connector. Tinned wires are not as secure in the captive screw connectors and can be easily pulled out. They may also break after being bent several times.

WThe two power cord wires must be kept separate while the power supply is plugged in. Remove power before wiring.

b Power LED — This LED lights green to indicate that the unit is receiving power.

Mic input (microphone level)

c Mic Input — A 3-pin, captive screw connector for a standard condenser microphone connection.

Tip Sleeve

Tip

Ring

Sleeve

3/16"

(5 mm) MAX

Unbalanced Input	Balanced Input	Captive Screw
(high impedance)	(high impedance)	Connector stripping

CFor unbalanced audio, ensure that the Phantom power switch is set to the “off” position.

MP 101 Series • MP 101 2-3