Extron electronic user manual 4-6MP 101 Series MP 101 D, MP 101 D, cont’d, Extron MP 101 D

MP 101 D, cont’d

NBefore mounting, the MP 101 D should be tested to verify that its connections and settings are correct.

To mount the MP 101 D into a Decora faceplate, do the following:

1.Secure all cables and connections onto the MP 101 D.

2.If it was not done previously, adjust the MP 101 D from its rear panel. See the previous section, “Adjusting the

MP 101 D”, for detailed instructions.

3.Place the MP 101 D through the opening in the wall or furniture and into the wall box. Take care not to damage the output cables, which fit behind the preamplifier at the back of the wall box.

4.Attach the Decora wallplate to the MP 101 D, as shown below.

Wall Box

Wall opening is flush with

edge of box.

MUTE

ACTIVE

IN

MIC

Extron MP 101 D

Mic to Line Preamplifier

Decora

Faceplate

5.Pretest the MP 101 D before performing the final mount in step 6.

6.Perform the final mount by attaching the cabled

MP 101 D and Decora faceplate into a wall. For detailed

4-6 MP 101 Series • MP 101 D