Sony CPD-E215E manual Additional settings Screen, Resetting the adjustments

Additional settings (SCREEN)

You can manually degauss (demagnetize) the screen, and adjust the moire cancellation level.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight

SCREEN and press the center of the control button again.

The SCREEN menu appears on the screen.

3Move the control button m/M to select the desired adjustment item.

Adjust the selected item according to the following instructions.

xDegaussing the screen

The monitor is automatically demagnetized when the power is turned on.

To manually degauss the monitor, first move the control button m/M to select (DEGAUSS). Then move the control button ,.

The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.

xAdjusting the moire*

If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.

To adjust the amount of moire cancellation, first move

the control button m/M to select (CANCEL MOIRE). Then move the control button </, until the moire effect is at a minimum.

*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.

Example of moire

Resetting the adjustments

This monitor has the following three reset methods. Use the RESET button to reset the adjustments.

RESET

xResetting a single adjustment item

Use the control button to select the adjustment item you want to reset, and press the RESET button.

xResetting all of the adjustment data for the current input signal

Press the RESET button when no menu is displayed on the screen. Note that the following items are not reset by this method:

•on-screen menu language (page 7)

•picture’s rotation (page 10)

xResetting all of the adjustment data for all

input signals

Press and hold the RESET button for more than two seconds. All

of the adjustment data (except for the USER settings in theGB COLOR menu) is reset to the factory preset levels.

11