USB 598 USB - User Guide
Connecting to the network
To connect to the network:
1.In the Watcher window, click Connect.
Once you’re connected to the network, Watcher displays “Connected,” the amount of time you’ve been connected, and the amount of data received (Rx) and transmitted (Tx).
Viewing the amount of data transferred
Once you’re connected to the network, Watcher shows the amount of data received (Rx) and transmitted (Tx).
Note: The information is not intended for billing purposes.
Once you end the connection, all numbers reset to zero.
Ending a connection
To end your network connection:
1.In the Watcher window, click Disconnect.
Using SMS
SMS (Short Messaging Service) allows you to send and receive short messages (usually not more than 160 characters) through the network.
Note: Subject to feature availability; check with your service provider to determine if you have access to this service.
To send/receive SMS messages, you must have 1X service
(page 28). SMS is temporarily unavailable, if you have powered off the modem (page 36).
SMS messages sent to you are stored on the network when you are out of coverage. Once you have service, the messages are transferred to your computer.
Determining whether you have new SMS messages
When you have new SMS messages, a number is displayed next to the Watcher icon 
in the Dock. The number indicates how many new (unread) SMS messages you have.
|
|
|
|
|
|
|
32 |
|
|
|
|
| 2131141 |
|
|
|