Sony USB 598 manual Radio frequency and electrical specifications

USB 598 modem - User Guide

Table 6-1: LED operation (continued)

LED	State	Indicates
	Off	No service is available.
		See the suggestions for “Amber, blinking” on
		page 39.
	Amber,	1X coverage is detected. Ready to connect to the
	blinking	network (click Connect).
	Amber, not	The modem is connected to the 1X network, and can
	blinking	send or receive data.
	Blue,	1x-EVDOcoverage (Rev. 0 or Rev. A) is detected.
	blinking	Ready to connect to the network (click Connect).
	Blue, not	The modem is connected to the 1x-EVDOnetwork,
	blinking	and can send or receive data.

Radio frequency and electrical specifications

Table 6-2: Radio frequency and electrical specifications

Approvals	Compliant with:
	IS-2000 Release 1.0 (CDMA 1X)
	IS-707-A Data, IS-856 (CDMA 1x-EVDO), IS-866,
	IS-878, IS-890, CDMA Development Group
	FCC (ID: N7NU598)
	Industry Canada (ID: 2417C-U598)
Voltage	+5.0 Vdc from USB slot
Current	Maximum: 600 mA (from USB port)
	Typical data call current (talk mode):
		300 mA (1X)
	Standby:	390 mA (1xEV-DO)
		55 mA (1xEV-DO/IS2000 hybrid
		mode)
Transmitter	250 mW (+24 dBm) average
power
Transmit	PCS:	1850 to 1909.95 MHz
	Cellular:	824.04 to 848.97 MHz
Receive	PCS:	1930 to 1989.95 MHz
	Cellular:	869.04 to 893.97 MHz
	GPS:	1575.42 MHz
Channel	1.25 MHz
spacing

40 2131141