Sony NSP-100 Carrying Out the Automatic Delete Setting, Carrying Out the All Data Delete Setting

Page 22

This confirms the setting.

Carrying Out the “Automatic

Delete” Setting

Operation

Select whether or not to enable the deletion of files for

 

 

which an automatic deletion date is set.

 

For details of the automatic deletion setting, refer to the

 

Help information for the BZNP-100 Software.

 

Use the following procedure.

1 In the “System Administrator Setup” screen, carry out any of the following.

Press numeric button 5.

Using the v and V buttons, select “5. Automatic Delete,” and press the ENTER button.

The setting can now be changed.

2 Using the b and B buttons, select either of the following.

“Yes”: Enable automatic deletion settings.

“No”: Disable automatic deletion settings.

3 Press the ENTER button.

This confirms the setting.

Carrying Out the “All Data Delete” Setting

This deletes all data from the unit.

Use the following procedure.

1 In the “System Administrator Setup” screen, carry out any of the following.

Press numeric button 6, then press the ENTER button.

Using the v and V buttons, select “6. All Data Delete,” and press the ENTER button.

A message appears, prompting you to confirm the deletion of all data.

Note

If in the “Setup” screen, the setting for “2. Delete Confirmation” is “No,” then this confirmation message does not appear.

2 Using the b and B buttons, select “Yes” or “No,” and press the ENTER button.

“Yes”: All data is deleted from the unit.

“No”: The data is not deleted, and the original screen reappears.

Carrying Out “Password Setup”

Use the following procedure.

1 In the “System Administrator Setup” screen, carry out any of the following.

Press numeric button 7, then press the ENTER button.

Using the v and V buttons, select “7. Password Setup,” and press the ENTER button.

The “Password Setup” window appears.

2 With the numeric buttons, enter a four-digit password, and press the ENTER button.

To correct an entry

Press the b button.

Each time you press this button, the last digit is deleted.

22

System Administrator Setup

Image 22
Contents Network Player For the customers in the USA For the customers in EuropeTable of Contents High Image Quality Simple Operation From Remote ControllerCompact and Lightweight Superimposed Movies, Stills, and TextNames and Functions Parts Main Unit Front Panel and Left SideMain Unit Rear Panel List button Remote ControllerENTER/b, B, v, V control QPLAY button Stop buttonPause button While playback is paused Pressing this buttonMain Unit DIP Switch and Remote Controller Settings Remote Controller PreparationsReplacing the Battery PreparationsStarting Up and Initial Settings Then followed by the initial setting screenDisplaying the Menu Screen To exit the Menu screenPlay button One Touch playback Automatic playback at power onPlaying a Playlist To stop during playbackDisplaying a Still Image File Playing a Movie FileTo change When a password has been set Deleting an Unwanted PlaylistDeleting Unwanted Movie and Still Image Files Setting the System Date and Time Displaying the Setup ScreenTo exit the Setup screen Making the Stop Events Display Setting Making the Delete Confirmation SettingMaking the Playout Log Store Setting To remove an existing setting Carrying out Playlist Mode SetupCarrying Out Screen Adjustment Adjustment procedureTo cancel the adjustment and exit the menu screen System Administrator SetupWhen a password has been set Carrying Out RS-232C Setup Carrying Out Network SetupSettings selected in the System Administrator Setup screen Setting Menu Language Carrying Out Password Setup Carrying Out the Automatic Delete SettingCarrying Out the All Data Delete Setting To correct an entryTo cancel the password Connecting the Power Examples of System Connection RGB, S-VIDEO, Composite Audio OUT 1For uploading content and playlists from a computer by SBP2 BZNP-100 Software must be installed in the computer AppendixSpecifications Precautions Sony Corporation
Related manuals
Manual 28 pages 59.05 Kb