Dell R820 PSU0006 Message, PSU0016 Message, PSU0031 Message, PSU0032 Message, PSU0033 Message

Page 141

Error Code

Message Information

 

 

PSU0006

Message

Power supply <number> type mismatch.

 

 

LCD Message

Power supply <number> is incorrectly configured. Check PSU.

 

Details

Power supplies should be of the same input type and power rating.

 

Action

Install matched power supplies and review proper configuration in

 

 

this manual.

PSU0016

Message

Power supply <number> is absent.

 

 

LCD Message

PSU <number> is absent. Check PSU.

 

Details

The power supply has been removed or has failed.

 

Action

1.

Remove and reinstall the power supply.

 

 

 

 

2.

Check cables and subsystem components in the system for

 

 

 

damage.

 

 

3.

If the issue persists, see Getting Help.

PSU0031

Message

Cannot communicate with power supply <number>.

 

 

LCD Message

Cannot communicate with PSU <number>. Re-seat PSU.

 

Details

The power supply may operate, however power supply monitoring is

 

 

degraded. System performance may be degraded.

 

Action

Remove and reinstall the power supply. If the issue persists, see

 

 

Getting Help.

PSU0032

Message

The temperature for power supply <number> is in a warning range.

 

 

Details

System performance may be degraded.

 

Action

Check the system operating environment, including airflow and inlet

 

 

temperature. Check system logs for temperature and thermal

 

 

component failures.

PSU0033

Message

The temperature for power supply <number> is outside of the

 

 

 

allowable range.

 

LCD Message

PSU <number> temperature outside of range. Check PSU.

 

Details

System performance may be degraded.

 

Action

Check the system operating environment, including airflow and inlet

 

 

temperature. Check system logs for temperature and thermal

 

 

component failures.

141

Image 141
Contents Regulatory Model E21S Series Regulatory Type E21S001 Page Contents Removing the Processor Expansion Module Installing System ComponentsInternal USB Memory Key Optional Troubleshooting Your System Using System DiagnosticsJumpers And Connectors 125 131149 Page Indicator, Button, or Icon Description Connector Front-Panel Features And IndicatorsLCD panel LCD Panel FeaturesSetup Menu Home ScreenView Menu Hard-Drive Indicator Patterns Back-Panel Features And Indicators Steady green Drive online Blinks green threeSeconds Indicators are off Link indicator is NIC Indicator CodesPower Indicator Codes Indicator Indicator Code Link indicator isPower Indicator Condition Pattern Not lit Other Information You May Need Keystroke Description Choosing The System Boot ModeF10 F11System Setup Options Entering System SetupResponding To Error Messages Using The System Setup Navigation KeysSystem Setup Main Screen System Bios ScreenSystem Information Screen Processor Settings Screen Memory Settings ScreenIP Prefetcher option is set to Enabled Option is set to EnabledExecute Disable Execute Disable option is set to EnabledSata Settings Screen Boot Settings ScreenIntegrated Devices Screen Serial Communications Screen System Profile Settings Screen System Security Screen System And Setup Password Features Miscellaneous SettingsAssigning a System And/Or Setup Password Page Entering The Uefi Boot Manager Using Your System Password To Secure Your SystemOperating With a Setup Password Enabled Boot Manager Screen Using The Boot Manager Navigation KeysUefi Boot Menu IDRAC Settings UtilityEntering The iDRAC Settings Utility Changing The Thermal SettingsPage Page Recommended Tools Front Bezel OptionalRemoving The Front Bezel Installing The Front Bezel Opening And Closing The SystemOpening The System Closing The System Inside The SystemInside a Two-Processor System Removing the Processor Expansion Module Processor Expansion ModulePage Alignment guide left Release lever Support pins Installing The Processor Expansion Module Installing The Cooling Shroud Cooling ShroudRemoving The Cooling Shroud Top Cover Lock Latch Installing The Top Cover Lock LatchSystem Memory Memory Socket Locations on the System Board Channel 0 slots A1, A5, and A9 ProcessorMode-Specific Guidelines General Memory Module Installation GuidelinesAdvanced ECC Lockstep Sample Memory Configurations1R x8, 1333 MT/s 1R x8, 1600 MT/s A1, A2, B1, B2 A5, A6, B5 and B6 B4 and 8 GB DIMMsD9, D10, D11, D12 2048 8R x4, 1600 MT/s Removing Memory ModulesEjecting The Memory Module Installing Memory ModulesInstalling The Memory Module Removing a 2.5 Inch Hard-Drive Blank Hard DrivesInstalling a 2.5 Inch Hard-Drive Blank Installing a Hot-Swap Hard DriveRemoving a Hot-Swap Hard Drive Removing a Hard Drive From a Hard-Drive Carrier Installing a Hard Drive Into a Hard-Drive Carrier Optical Drive OptionalRemoving The Optical Drive Cooling Fans Installing The Optical DriveRemoving a Cooling Fan Removing and Installing a Cooling FanRemoving The Cooling-Fan Assembly Installing The Cooling FanRemoving and Installing the Cooling-Fan Assembly Installing The Cooling-Fan AssemblyReplacing The Internal USB Key Internal USB Memory Key OptionalExpansion Cards And Expansion-Card Risers Expansion Cards Installation GuidelinesRiser PCIe Slot Height Length Link Width Slot WidthRemoving An Expansion Card From An Expansion-Card Riser 1 Or Expansion-card connector Expansion-card holder Grooves Removing An Expansion Card From The Expansion-Card Riser Close the system Expansion-card connector Expansion-card riser Installing An Expansion Card Into The Expansion-Card Riser Removing Expansion-Card Risers Riser guide-back right Expansion-card connector slot Removing and Installing the Expansion Card Riser SD vFlash Card Installing Expansion-Card RisersInternal Dual SD Module Replacing An SD vFlash CardRemoving The Internal Dual SD Module Removing and Installing the Internal Dual SD Module Installing the Internal Dual SD ModuleInternal SD Card Installing An Internal SD CardIntegrated Storage Controller Card Removing An Internal SD CardRemoving The Integrated Storage Controller Card Removing the SAS Cable ConnectorStorage-controller card Network Daughter Card Installing The Integrated Storage Controller CardRemoving The Network Daughter Card Lift the network daughter card out of the chassis Installing The Network Daughter Card ProcessorsRemoving The Processor Heat sink Close-lock symbol Removing and Installing a Processor Installing The ProcessorHot Spare Feature Power SuppliesRemoving and Installing an AC Power Supply Removing An AC Power SupplyWiring Instructions For a DC Power Supply Installing An AC Power SupplyRequired Wires Assembling The DC Input Power Wires Removing a DC Power SupplyRemoving and Installing a DC Power Supply Installing a DC Power SupplyRemoving The Power Supply Blank System BatteryInstalling The Power Supply Blank Replacing The System BatteryHard-Drive Backplane Replacing the System BatteryRemoving The Hard-Drive Backplane Hooks Cable securing guide Perc card System board Hard-drive backplane PCIe SSD backplane Release tab Connectors PCIe SSD C connector Hooks Securing slots Release tabs Cabling Diagram-2.5 Inch x16 Hard-Drive Backplane Installing The Hard-Drive BackplaneRemoving The Control-Panel Assembly Control Panel AssemblyInstalling The Control-Panel Assembly System BoardRemoving The System Board Page Removing and Installing the System Board Installing The System BoardPage Troubleshooting External Connections Troubleshooting The Video SubsystemTroubleshooting a USB Device Troubleshooting a Serial I/O Device Troubleshooting a NICTroubleshooting a Wet System Troubleshooting a Damaged System Troubleshooting The System Battery Troubleshooting Power SuppliesTroubleshooting Cooling Problems Troubleshooting System Memory Troubleshooting Cooling FansTroubleshooting An SD Card Troubleshooting An Internal USB KeyTroubleshooting An Optical Drive Troubleshooting a Tape Backup UnitTroubleshooting a Hard Drive Troubleshooting a Storage Controller Troubleshooting Processors Troubleshooting Expansion CardsIf the problem persists, see Getting Help 118 When To Use The Embedded System Diagnostics Dell Online Diagnostics Dell Embedded System DiagnosticsRunning The Embedded System Diagnostics System Diagnostic ControlsLeast one event description is recorded Jumper Setting Description System Board Jumper SettingsConnector Description System Board ConnectorsRISER1 Disabling a Forgotten Password Expansion slots using riser card Expansion BusMemory Drives Connectors BackFront InternalExpanded Operating Temperature Connectors VideoTemperature Continuous Operation Environmental TemperatureRelative Humidity Maximum VibrationGaseous Contamination Environmental130 LCD Messages System Error MessagesViewing LCD Messages Removing LCD MessagesAMP0302 Message Error CodeDetails ActionBAT0002 Message ASR0003 MessageBAT0017 Message CPU0000 MessageCPU0023 Message CPU0010 MessageCPU0204 Message CPU0700 MessageCPU0702 Message CPU0703 MessageCPU0704 Message Action Reinstall or reconnect the hardware HWC2003 Message If the issue persists, see Getting HelpFAN0000 Message Details Fan operating speed is out of range ActionMEM0001 Message MEM0000 MessageMEM0007 Message MEM0701 MessageMEM8000 Message MEM1208 MessagePCI1302 Message PCI1304 MessagePCI1342 Message PCI1320 MessagePCI1348 Message PCI1360 MessagePST0129 Message PST0128 MessagePSU0001 Message PSU0002 MessagePSU0016 Message PSU0006 MessagePSU0031 Message PSU0032 MessagePSU0035 Message PSU0034 MessagePSU0036 Message PSU0037 MessageSystem power inventory change PSU1201 Message Power supply redundancy is lost DetailsConfiguration and power consumption System power consumptionRFM1201 Message RFM1014 MessageRFM2001 Message RFM2002 MessageAppear if the user disabled event logging SEL0006 Message All event logging is disabled DetailsPower. If problem persists call support Security may be compromisedFailed Issues persists, contact supportFailures TMP0121 MessageAlert Messages Diagnostic Messages148 Contacting Dell Getting Help
Related manuals
Manual 8 pages 22.5 Kb Manual 143 pages 33.86 Kb