Dell R820 Removing The Integrated Storage Controller Card, Removing the SAS Cable Connector

Removing The Integrated Storage Controller Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2.Open the system.

3.Lift the expansion-card latch out of the slot.

4.Pull and slide the card out from the connector on riser card 3.

5.Disconnect the cables connected to the card:

a.Press down and hold the metal tab on the SAS cable connector.

b.Pull the SAS cable out of the connector.

Figure 41. Removing the SAS Cable Connector

a.SAS cable connector

b.metal tab

c.connector

79