Dell E21S001, R820 owner manual Installing The Top Cover Lock Latch

NOTE: For proper seating of the cooling shroud in the system chassis, ensure that the cables inside the system are routed along the chassis wall and secured using the cable securing bracket.

1.Align the tabs on the cooling shroud with the securing slots on either side of the chassis.

2.Lower the cooling shroud into the chassis until it is firmly seated.

3.Close the system.

4.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Top Cover Lock Latch

Installing The Top Cover Lock Latch

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2.Open the system.

3.Remove the cover.

4.Orient the top cover lock latch in a direction such that the screw hole on the top cover lock latch is aligned with the screw hole on the latch.

5.Slide the top cover lock latch until the screw holes are completely aligned.

6.Attach the top cover lock latch to the latch using the Torx screw.

Figure 15. Installing the Top Cover Lock Latch

1. screw 2. top cover lock latch

3.latch

7.Close the system.

8.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

42