Item | Indicator, Button, or | Icon | Description |
| Connector |
|
|
|
|
|
|
|
|
| To reset iDRAC (if not disabled in the iDRAC |
|
|
| Settings option) press and hold the button for |
|
|
| more than 15 seconds. |
11 | Power supply |
| 250 W AC power supply. |
12 | Retention clip |
| Secures the power cable. |
NIC Indicator Codes
Figure 3. NIC Indicator |
| ||
1. | link indicator | 2. | activity indicator |
Indicator | Indicator Code |
| |
Link and activity | The NIC is not connected to the network. | ||
indicators are off |
|
| |
Link indicator is | The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10 | ||
green | Gbps). |
| |
Link indicator is | The NIC is connected to a valid network at less than its maximum port speed. | ||
amber |
|
| |
Activity indicator is Network data is being sent or received. blinking green
Related Documentation
WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document.
NOTE: For all PowerEdge and PowerVault documentation, go to dell.com/support/manuals and enter the system Service Tag to get your system documentation.
NOTE: For all Dell OpenManage documents, go to dell.com/openmanagemanuals.
NOTE: For all operating system documents, go to dell.com/operatingsystemmanuals.
NOTE: For all storage controllers and PCIe SSD documents, go to dell.com/ storagecontrollermanuals.
10