Dell R220 owner manual HWC1001 Message

Page 91

Error Code

Message Information

 

 

Action

Remove and reinstall the fan. If the issue persists, see Getting

 

 

Help.

HWC1001

Message

The <name> is absent.

 

 

Details

The absent device may be necessary for proper operation.

 

 

System functionality may be degraded.

 

Action

Reinstall or reconnect the hardware.

HWC2003

Message

The storage <name> cable is not connected, or is improperly

 

 

 

connected.

 

Details

The cable may be necessary for proper operation. System

 

 

functionality may be degraded.

 

Action

Check if the cable is present, then reinstall or reconnect.

HWC2005

Message

The system board <name> cable is not connected, or is

 

 

 

improperly connected.

 

Details

The cable may be necessary for proper operation. System

 

 

functionality may be degraded.

 

Action

Check if the cable is present, then reinstall or reconnect.

MEM0000

Message

Persistent correctable memory errors detected on a memory

 

 

 

device at location(s) <location>.

 

Details

This is an early indicator of a possible future uncorrectable

 

 

error.

 

Action

Re-seat the memory modules. If the issue persists, see

 

 

Getting Help .

MEM0001

Message

Multi-bit memory errors detected on a memory device at

 

 

 

location(s) <location>.

 

Details

The memory module has encountered an uncorrectable

 

 

error. System performance may be degraded. The operating

 

 

system and/or applications may fail as a result.

 

Action

Re-seat the memory modules. If the issue persists, see

 

 

Getting Help.

MEM0007

Message

Unsupported memory configuration; check memory device

 

at location <location>.

91

Image 91
Contents Dell PowerEdge R220 Page Contents Page Jumpers And Connectors Getting Help About Your System Front-Panel Features And IndicatorsSee Getting Help Back-Panel Features and Indicators Back-Panel Features And IndicatorsRelated Documentation NIC Indicator CodesQuick Resource Locator Page Choosing The System Boot Mode Using The System Setup And Boot ManagerResponding To Error Messages Entering System SetupUsing The System Setup Navigation Keys System Setup Main Screen System Setup OptionsSystem Bios Screen Processor Settings Screen Memory Settings ScreenSystem Information Screen Menu Item Description Embedded Sata Sata Settings ScreenIntegrated Devices Screen Boot Settings ScreenSerial Port Address Serial Communications ScreenSystem Security Screen System Profile Settings ScreenRecovery Delay Miscellaneous SettingsAssigning a System And/Or Setup Password System And Setup Password FeaturesUsing Your System Password To Secure Your System Deleting Or Changing An Existing Setup PasswordOperating With a Setup Password Enabled Using The Boot Manager Navigation Keys Entering The Uefi Boot ManagerEmbedded System Management IDRAC Settings UtilityBoot Manager Screen Uefi Boot MenuChanging The Thermal Settings Entering The iDRAC Settings UtilityFront Bezel Optional Installing System ComponentsInstalling The Front Bezel Recommended ToolsOpening The System Opening And Closing The SystemClosing The System Inside The SystemRemoving The Chassis Intrusion Switch Chassis Intrusion SwitchOptical Drive Optional Installing The Chassis Intrusion SwitchRemoving The Optical Drive Removing and Installing the Optical Drive Installing The Optical DriveRemoving a 3.5 Inch Hard-Drive Cage Hard DrivesHard-drive cage Installing a 3.5 Inch Hard-Drive Cage Removing a 3.5 Inch Hard Drive From The Hard-Drive Cage Installing a 3.5 Inch Hard Drive Into The Hard-Drive CageRemoving a 2.5 Inch Hard-Drive Cage Removing and Installing a 2.5 Inch Hard-Drive CageInstalling a 2.5 Inch Hard-Drive Cage Removing a 2.5 Inch Hard Drive From The Hard-Drive Cage Installing a 2.5 Inch Hard Drive Into The Hard-Drive CageRemoving The LED Module LED ModuleControl-Panel Board Installing The LED ModuleRemoving The Control-Panel Board Removing and Installing the Control-Panel Board Installing The Control-Panel BoardRemoving a Cooling Fan Cooling FansRemoving and Installing a Cooling Fan Installing a Cooling FanRemoving The Cooling Shroud Cooling ShroudSystem Memory Installing The Cooling ShroudSample Memory Configurations General Memory Module Installation GuidelinesRemoving the Memory Module Removing Memory ModulesInstalling Memory Modules Internal USB Memory Key Optional Removing And Installing The Internal USB KeyExpansion Cards And Expansion-Card Risers Expansion Card Installation GuidelinesExpansion Card Types And Form Factor Removing An Expansion Card Removing and Installing the Expansion Card on the RiserRemoving The Expansion-Card Riser Installing An Expansion CardRemoving and Installing the Expansion-Card Riser Installing The Expansion-Card RiserRemoving The iDRAC7 Enterprise Card IDRAC7 Enterprise Card OptionalRemoving and Installing the iDRAC7 Enterprise Card Installing The iDRAC7 Enterprise CardReplacing The System Battery System BatteryRemoving The Processor ProcessorRemoving and Installing the Processor Heat Sink Removing and Installing a Processor Installing The ProcessorPower Supply Unit Removing and Installing the Power Supply Unit Removing The Power Supply UnitSystem Board Installing The Power SupplyRemoving The System Board Removing and Installing the System Board Installing The System BoardPage Page Troubleshooting a USB Device Troubleshooting Your SystemTroubleshooting External Connections Troubleshooting The Video SubsystemTroubleshooting a NIC Troubleshooting a Serial I/O DeviceTroubleshooting a Damaged System Troubleshooting a Wet SystemTroubleshooting The System Battery Troubleshooting Cooling Problems Troubleshooting The Power SupplyTroubleshooting Cooling Fans Troubleshooting System Memory Troubleshooting An SD Card Troubleshooting An Internal USB KeyTroubleshooting a Hard Drive Troubleshooting An Optical DriveTroubleshooting Expansion Cards Troubleshooting The Processor Running The Embedded System Diagnostics Using System DiagnosticsDell Embedded System Diagnostics When To Use The Embedded System DiagnosticsDisplayed if at least one event description is recorded System Board Jumper Settings Jumpers And ConnectorsINTUSB1 System Board ConnectorsDisabling a Forgotten Password Page Udimm Technical SpecificationsUSB 300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985 Page System Messages System Error MessagesBAT0002 Message CPU0023 Message CPU0703 Message HWC1001 Message MEM0701 Message PCI1304 Message PCI1360 Message SEL0006 Message Alert Messages Diagnostic MessagesDocumentation Feedback Locating Your System Service TagGetting Help Contacting Dell
Related manuals
Manual 93 pages 12.29 Kb