Dell R210 II manual Power, Thermal, Acoustic, Power Supplies, Power Supply Specifications

Dell

5 Power, Thermal, Acoustic

5.1 Power Supplies

The base system includes a single 250W power supply. This unit provides power to the planar, the internal hard drive bays, and one slim optical disk drive bay. Power is soft-switched, allowing power cycling using a switch on the front of the system enclosure or through software control (server management functions). The power system is compatible with industry standards, such as ACPI and Server 2000. The power supply is equipped with automatic input voltage detection.

5.2 Power Supply Specifications

Table 3.	Power Supply Specifications
Feature		Non-redundant Power Supply
Dimensions		L-210 mm x W-106 mm x H-40
		mm
Status Indicators		None
Integrated Fans		One
AC Cord Rating		15 Amps @ 120 VAC, 10 Amps @
		240 VAC
Input Voltage		90 – 264 VAC
Auto-ranging		Yes
Line Frequency		47–63 Hertz
		Under typical line conditions
		and over the entire system
Maximum Inrush Current		ambient operating range, the
		inrush current may reach 55
		Amps for 10 ms or less.
Hot-plug Capability		No
Output Power		250W
Maximum Heat Dissipation		1039 BTU per hour maximum
Efficiency		82% to 85% @ 115 VAC
20% to 100% Load		82% to 85% @ 230 VAC

5.3 Heat Dissipation

The heat dissipation for the R210 II power supply is measured at 1040 BTU/hr (maximum).

19

PowerEdge R210 II Technical Guide